100 - 40,000 kilogram
40,001 - 999,999 kilogram
group nameRTV-2 silicone rubber for molds making
Min Order100 kilogram
brand nameHong Ye silicone rubber
modelHY- 625, HY-630, HY-638 RTV Silicone Rubber
payment methodT/T, L/C, Westem Union
update timeTue, 05 Nov 2013 12:28:53 GMT
Appearance Liquid
Purity 100%
Color white/ off-white/ blue/ red/ yellow
Application Mold Making Silicone Rubber
Curing agent 4% free of charged
Molding method Pouring , brushing
Package vacuumed packing
Shelf life 12 months
MOQ 100KGS
Sample Free
Min Order100 kilogram
RTV Silicone Rubber For Mould Making
-------RTV-2 room temperature addition cure (platinum cure) silicone rubber series
Application of food grade mould making silicone rubber
Food grade silicone rubber mainly used for making precision molds, food grade molds(such as chocolate, cake moulds), fiberglass molding, shoes insoles, for life casting, fabric finishing, seal for electronic components and solar circuit board, trademark decoration, baby nipples, cable accessories, etc.
Datasheet RTV Silicone Rubber For Mould Making -- addition cure type
Model | HY-E620 |
Appearance | translucent |
Mixing proportion of curing agent(%) | 1:1 |
Operating time ( mins ) (25- 30 °C) | 30±10 |
Curing time( hrs) | 4±1 |
Hardness (A°) | 20±2 |
Density ( g/cm 3 ) | 1.08 |
Viscosity (CS) | 7000±2000 |
Tensile-strength ( kgf /cm2 ) | ≥40 |
Tear-strength (kgf /cm2 ) | ≥15 |
Elongation-break(%) | ≥300 |
Retractility(%) | ≤0.1 |
Model | HY-E625 |
Appearance | translucent |
Mixing proportion of curing agent(%) | 1:1 |
Operating time ( mins ) (25- 30 °C) | 30±10 |
Curing time( hrs) | 4±1 |
Hardness (A°) | 25±2 |
Density ( g/cm 3 ) | 1.08 |
Viscosity (CS) | 8000±2000 |
Tensile-strength ( kgf /cm2 ) | ≥55 |
Tear-strength (kgf /cm2 ) | ≥10 |
Elongation-break(%) | ≥300 |
Retractility(%) | ≤0.1 |
Model | HY-E642 |
Appearance | translucent |
Mixing proportion of curing agent(%) | 1:1 |
Operating time ( mins ) (25- 30 °C) | 30±10 |
Curing time( hrs) | 4±1 |
Hardness (A°) | 40±2 |
Density ( g/cm 3 ) | 1.08 |
Viscosity (CS) | 7600(17000,3700) |
Tensile-strength ( kgf /cm2 ) | ≥68 |
Tear-strength (kgf /cm2 ) | ≥14.5 |
Elongation-break(%) | ≥318 |
Retractility(%) | ≤0.1 |
Features of food grade mould making silicone rubber
· Two-part silicone rubber:flowable liquid silicone and curing agent.
· Cured at room temperature within 3-6 hours.
· An exceptional fluidity and good operability.
· High duplicate times.
Description of food grade mould making silicone rubber
RTV-2 addition molding silicone rubber is generally named two-components silicone rubber, Part A is a flowable liquid, part B is the curing agent. It features an exceptional fluidity and good operability. The mixing ratio can be 100:10 or 1:1,mainly be suitable for making FDA molds application.
Operating instruction of food grade mould making silicone rubber
1.Stir part A and part B with right mixing ratio evenly. (HY-E620 is 1:1) and get the mixture for vacuum-pumping.(If there is no vacuumizer,you can just pour the mixture slowly from the corner so that less bubbles caused).
2.Enclose the product (the original model) with four plastic plates or wooden plates.
3. Clean your products and brush a layer of release agent(detergent or soap water) on your product.
4.Pour the mixture with correct mixing ratio into the model frame.
After about 2-4 hours, when the silicone cured, get out the original model, and there you get a finished addition cured silicone mold .
Shelf life of food grade mould making silicone rubber
Twelve (12) months from date of shipment when stored at 24°C in original unopened packages.
More details of food grade mould making silicone rubber , pls feel free to contact Ms Taylor:
Tel:086-755-89212380
Mob:086-18938867522
Skype: taylordl828
网络文化经营许可证:浙ICP备14006100号-11 2007-2024 Tradevv.com. All rights reserved.