High Strength Moulding Silicone Rubber for Plaster Ceiling Molds

 High strength moulding silicone rubber for plaster ceiling molds  

HongYe Silicone rubber provides a large range of moulding silicone rubber for plaster ceiling molds (poly-condensation  and poly-addition) with different properties, according to specific application.
 

moulding silicone rubber for plaster ceiling molds reticulating at room temperature.After the addition of appropriate catalyst they form a stable and not reversible compound characterized by high elasticity and mechanical resistance. Owing to their high chemical-mechanical properties combined with easy workability, the moulding silicone rubber for plaster ceiling molds are suitable for making flexible moulds and matrices to reproduce, starting from an original model, hand-made articles of any kind and form,in different applicative sectors. Silicone moulds, owing to their anti-adherence features, allow an easy demoulding of models and assure extreme faithfulness in the reproduction of details.

moulding silicone rubber for plaster ceiling molds applications
moulding silicone rubber for plaster ceiling molds will reproduce the finest detail and is suitable for a variety of industrial and art related applications including prototypes, furniture, sculpture and architectural elements.  Rubber silicone for making baluster mold can also be used to cast a variety of materials including wax, gypsum, low melt alloys/metals and urethane, epoxy or polyester resins (without using a release agent).

moulding silicone rubber for plaster ceiling molds for artificial stone,concrete statue molds,garden statue molds,stone molds,cement crafts,GRC/GPR decorations,ect.
The quality of our rtv silicone rubber is similar with Dow corning silicone,wacker silicone,smooth on silicone,but the prices of silicone rubber is more competitive than them.

moulding silicone rubber for plaster ceiling molds Main features

• Cold vulcanize with the appropriate catalyst
• Can be applied by direct pouring or by spreading
• Easy mould building, no need of particular equipments
• High elasticity, easy demoulding also for objects with undercuts
• Extreme faithfulness in the reproduction of details from any original model
• Odourless and no toxic
• Anti-adherent (no need of release agents for demoulding)
• poly-addition curing: low linear shrinkage and higher stability in time

How to making silicone rubber molds with moulding silicone rubber for plaster ceiling molds ?

a.deal with the orignal sculpture

b.sprayed on release agent

c.weigh correct molding silicone rubber according to the instruction

d.stir two part molding silicone compound evenly

e.vacuum pumping about 5 min

f.poured on or brushed on the orignal sculpture

g.curing 2-4 hours

h.demould and apply to casting

Attention for making a mold by moulding silicone rubber for plaster ceiling molds

1. moulding silicone rubber for plaster ceiling molds is white flowing liquid with general hardness of 22-40A° after curing.
2. If the mold makers want to make large products and large size molds, the mold should be made of silicone rubber with high hardness. On the contrary, if the products with fine and precision patterns, it should be made of silicon with low hardness.
3. The amount of the curing agent depends on the actual requirements of the customer. If molds requiring fast drying and demould, more curing agent is needed; Contrarily, if molds requiring slower drying and demould, less curing agent is needed.
4. it doesn't better to add silicone oil into silicone rubber. If a special soft silicon mold or fine detailed and complex patterns products are required, 5%-10% silicone oil can be added to soften the mold for easy demould. )

Any questions about Silicone Rubber, Leah is at your service.

TEL: 086-755-89212382

FAX: 086-755-89948030

MOBILE: 086-189 3886 7561

Website: www(dot)szrl(dot)net

E-MAIL: hyji(at)szrl(dot)net

Skype: leahchou1214

QQ: 189 3886 7561