200 - 40,000 kilogram
40,001 - 999,999 kilogram
group nameRTV-2 silicone rubber for molds making
Min Order200 kilogram
brand nameHong Ye silicone rubber
modelHY630 HY638 silicone rubber
payment methodT/T, L/C, Westem Union
update timeTue, 05 Nov 2013 12:50:38 GMT
Color White
silicone rubber:curing agent 3%-5%
Certification SGS,MSDS,RoHS
Material 100% silicone
Appearance Fluid
Appliacation molding silicone rubber
Min Order200 kilogram
RTV-2 Silicone Rubber for Polyurethane Crafts mold making
-------RTV-2 room temperature addition cure (platinum cure) silicone rubber series
Application of RTV-2 Silicone Rubber for Polyurethane Crafts mold making
Food grade silicone rubber mainly used for making precision molds, food grade molds(such as chocolate, cake moulds), fiberglass molding, shoes insoles, for life casting, fabric finishing, seal for electronic components and solar circuit board, trademark decoration, baby nipples, cable accessories, etc.
Datasheet RTV-2 Silicone Rubber for Polyurethane Crafts mold making --
Model | HY-E620 |
Appearance | translucent |
Mixing proportion of curing agent(%) | 1:1 |
Operating time ( mins ) (25- 30 °C) | 30±10 |
Curing time( hrs) | 4±1 |
Hardness (A°) | 20±2 |
Density ( g/cm 3 ) | 1.08 |
Viscosity (CS) | 7000±2000 |
Tensile-strength ( kgf /cm2 ) | ≥40 |
Tear-strength (kgf /cm2 ) | ≥15 |
Elongation-break(%) | ≥300 |
Retractility(%) | ≤0.1 |
Model | HY-E625 |
Appearance | translucent |
Mixing proportion of curing agent(%) | 1:1 |
Operating time ( mins ) (25- 30 °C) | 30±10 |
Curing time( hrs) | 4±1 |
Hardness (A°) | 25±2 |
Density ( g/cm 3 ) | 1.08 |
Viscosity (CS) | 8000±2000 |
Tensile-strength ( kgf /cm2 ) | ≥55 |
Tear-strength (kgf /cm2 ) | ≥10 |
Elongation-break(%) | ≥300 |
Retractility(%) | ≤0.1 |
Model | HY-E642 |
Appearance | translucent |
Mixing proportion of curing agent(%) | 1:1 |
Operating time ( mins ) (25- 30 °C) | 30±10 |
Curing time( hrs) | 4±1 |
Hardness (A°) | 40±2 |
Density ( g/cm 3 ) | 1.08 |
Viscosity (CS) | 7600(17000,3700) |
Tensile-strength ( kgf /cm2 ) | ≥68 |
Tear-strength (kgf /cm2 ) | ≥14.5 |
Elongation-break(%) | ≥318 |
Retractility(%) | ≤0.1 |
Features of RTV-2 Silicone Rubber for Polyurethane Crafts mold making
· Two-part silicone rubber:flowable liquid silicone and curing agent.
· Cured at room temperature within 3-6 hours.
· An exceptional fluidity and good operability.
· High duplicate times.
Description of RTV-2 Silicone Rubber for Polyurethane Crafts mold making
RTV-2 addition molding silicone rubber is generally named two-components silicone rubber, Part A is a flowable liquid, part B is the curing agent. It features an exceptional fluidity and good operability. The mixing ratio can be 100:10 or 1:1,mainly be suitable for making FDA molds application.
Operating instruction of RTV-2 Silicone Rubber for Polyurethane Crafts mold making
1.Stir part A and part B with right mixing ratio evenly. (HY-E620 is 1:1) and get the mixture for vacuum-pumping.(If there is no vacuumizer,you can just pour the mixture slowly from the corner so that less bubbles caused).
2.Enclose the product (the original model) with four plastic plates or wooden plates.
3. Clean your products and brush a layer of release agent(detergent or soap water) on your product.
4.Pour the mixture with correct mixing ratio into the model frame.
After about 2-4 hours, when the silicone cured, get out the original model, and there you get a finished addition cured silicone mold .
Shelf life of RTV-2 Silicone Rubber for Polyurethane Crafts mold making
Twelve (12) months from date of shipment when stored at 24°C in original unopened packages.
Need any help on silicone rubber, please feel free to contact Ms Kitty:
Tel:86-755-89948294
Mob:86-18938867593
E-mail: hysh(at)szrl(dot)net
Skype:kity-467707861
网络文化经营许可证:浙ICP备14006100号-11 2007-2024 Tradevv.com. All rights reserved.