200 - 40,000 kilogram
40,001 - 999,999 kilogram
group nameRTV-2 silicone rubber for molds making
Min Order200 kilogram
brand nameHong Ye silicone rubber
modelHY-9 series
payment methodT/T, L/C, Westem Union
update timeTue, 05 Nov 2013 13:18:05 GMT
natural liquid
color high translucent
HS 31900000
application mold making
Certification SGS,MSDS,RoHS
place of orgin Guangdong China (Mainland)
Min Order200 kilogram
Brief description
Silicone rubber for mold making:
1. resistance to deformation, high-temperature
2. high reproduction times
3. good tensile strength
4. exceptional fluidity and good operability.
Silicone Dolls Raw Material Performance:
Medical Grade Silicone for Body Organs ,It has good electrical performance, chemical stability with features of waterproof, corrupt resistance, physiological inert, non-toxic, tasterlessness, aging-resistance, easy pouring, easy operation, and completely vulcanization. It can meet requirement of the Mechanical strength even under a very low hardness. When making printing pads, it will be with low shrinkage and can keep its initial hardness as original after a long time using. So it is the specially suitable material for life-casting.
Silicone Dolls Raw Material Main applications
Medical grade raw material silicone , it is mainly used to make soft silicone products ,such as sex toys, silicone dolls, love dolls, silicone mask, body organs, body breast enhancers, shoulder pads, paster, trackion ,etc.
Medical grade raw material silicone is a king of nearly-colorless translucent fulid. We can adjust its color as per the request of customers.
liquid injection molding silicone rubber and features:
This product is suitable for liquid injection molding process produces various silicone products. Such as: electric power etc series products. LIMS is in liquid silicone rubber and have the same ordinary silicone features, such as excellent heat-resistance, electrical insulation resistance and radiation linear, resistant to discharge sex etc. According to the general use, high strength with, transparent, flame retardant using products with USES, with various series of products, also can use purpose in new product development, focus on shorten shape time, improve the utilization rate of raw materials, improve the production efficiency, make cost greatly decreased to become a reality.
Advantage of mold injection silicone is as follows:
1 Relative low viscosity , not only can be pumped to mix, but also can be formed the continuous automation during the process of measurement, mixing, injection molding. as well as formed products with different complex shapes.
2 Curing speed can be finished within 20~30mins and the molding cycle time is less than 1min, which is good for saving costs, efforts and be high efficiency.
3 with low molding pressure, accurate measurement, high precision molds, products can be perfectly formed with no flash or defects, which helps to save cost on raw materials and post-working process.
4 The performance of finished products can be compared favorably to HTV silicone rubber, while the labor costs can be saved by half.
5 The vulcanizing system of this product is the same as other addition-cured silicone rubber, but there won’t be peroxide decomposition products which generated by HTV silicone cured. It is with high transparency, high tear strength, good elasticity, good weather-ability, and with resistance of high temperature, aging, as well as excellent resistance to yellowing
Datasheet of our mold injection silicone:
Model | Color | Viscosity Cp | Density g/cm3 | Hardness(Shore A) | Elongation((%) | Tear Strength(kN/m) | Curing condition |
HY-921 | Transparent | 400 | 1.07 | 30 | 400 | 25 | Pls mix part A and part B by mixing ratio 1:1. The mixture will get formed to be molds with size 150mm*150mm*2mm within 1mins under Temperature 150 centi degrees. |
HY-922 | Transparent | 600 | 1.08 | 40 | 550 | 35 | |
HY-923 | Transparent | 700 | 1.10 | 50 | 450 | 35 | |
HY-924 | Transparent | 600 | 1.12 | 60 | 380 | 35 |
Frequently asked questions of silicone rubber for mold making
Why does the silicone rubber mold have few molding times?
The silicone rubber mold has few molding times is due to follwoing reasons: adding too much silicone oil which will destroy the molecular of silicone rubber; making the mold for small and fine detailed products with higher hardness silicone rubber which is easy to break; making the mold for large products with soft silicone rubber which will reduce the tensile and tear strength of the mold, and the mold will have deformation. Thus, we should take the proper silicone rubber to make the mold for suitable products.
Any questions of silicone rubber for mold making, please feel free to contact Mr. Allen :
TEL: 086-755-89212362
FAX: 086-755-89948030
MOBILE:086-18938861889
Place of Origin Guangdong China
Brand Name Hong Ye Silicone Rubber
Model Number HY625 HY630 silicone rubber
Payment & Shipping Terms:
Minimum Order Quantity: 200 Kilogram
Price: FOB shenzhen USD 5.8~7.5
Packaging Details: 25kg/drum and 200kg/drum
Delivery Time: within 3 days after payment confirmed in our bank.
Payment Terms: L/C,T/T
Supply Ability: 8 Ton per Day
Certifications:RoHS.MSDS.SGS ISO9001:2000
selling_high quality liquid injection silicone rubber for baby nipples
网络文化经营许可证:浙ICP备14006100号-11 2007-2024 Tradevv.com. All rights reserved.