Looking for Liquid silicone rubber distributors
- US $6.89
100 - 40,000 kilogram
- US $5.89
40,001 - 999,999 kilogram
group nameRTV-2 silicone rubber for molds making
-
Min Order100 kilogram
brand nameHong Ye silicone rubber
modelHY E620
payment methodT/T, L/C, Westem Union
-
update timeTue, 05 Nov 2013 13:19:49 GMT
Paramtents
Other Names molding silicone rubber
Grade Standard Food Grade,Medicine Grade
Purity 100%
Appearance liquid and transparent silicone
Application for molding
color white,red,yellow,pink,transparent
samples free for testing
mix ratio 100:5
certificate ISO 9001,SGS,ROSH,FDA,UL
history 14 years
business type factory
main products rtv silicone rubber
environmental protection yes
material liquid silicone with two part
usage Looking for Liquid silicone rubber distributors
Packging & Delivery
Min Order100 kilogram
Briefing
1. non deformation
2. low shrinkage
3. high tear strength
Detailed
Description of molding silicone rubber RTV
HY- E620# addition molding silicone is generally named two-components silicone rubber, Part A is a flowable liquid, part B is the curing agent. It features an exceptional fluidity and good operability. The mixing ratio is 1:1,mainly be suitable for making FDA molds application.
Applications of molding silicone rubber RTV
HY- E620# addition molding silicone could be mainly used for making concrete stones, precision molds, PU molds, for life casting, fabric finishing, seal for electronic components and solar circuit board, trademark decoration. etc.
Technique Data of HY-E620# molding silicone rubber RTV
Model | Color | Mixing ratio (%) | Pot life (mins) | Demould time ( hrs) | Hardness ( A0 ) | Tensile-strength (kgf/cm2) | Tear-strength (kgf/cm) | Viscosity (mPas) | Shrinkage rate (%) | Elongation (%) |
E620# | transparent | 1:1 | 40-50 | 5-6 | 20 | ≥ 65 | ≥ 22 | 10000±2000 | ≤0.1% | 460% |
OPERRATING INSTRUCTION of HY-E620# molding silicone rubber RTV :
1. Stir part A and part B with right mixing ratio evenly. And get the mixture for vacuum-pumping. (If there is no vacuumizer, you can just pour the mixture slowly from the corner so that less bubbles caused)
2. Enclose the product (the original model) with four plastic plates or wooden plates.
3. Clean your products and brush a layer of release agent(detergent or soap water) on your product.
4. Pour the mixture with correct mixing ratio into the model frame.
After about 2-4 hours, when the silicone cured, get out the original model, and there you get a finished addition cured silicone mold .
SHELF LIFE:Twelve (12) months from date of shipment when stored at 24°C in original unopened packages.
PACKAGE:Packed in clean 20kg/pail, 200kg/pail.
Our FDA certificate of food grade silicone rubber
You need a product
You May Like
- Nearest port for product export
- Shenzhen, Guangzhou, Xiamen, Shanghai
- Delivery clauses under the trade mode
- FOB, CFR, CIF
- Acceptable payment methods
- T/T, L/C, Westem Union
- Export mode
- Export through agents