RTV-2 Silicone Rubber in 30 shore A

RTV-2 Silicone Rubber Description
RTV-2 Silicone Rubber in 15 shore A  that cure at room temperature to a high strength, flexible rubber. The RTV grades differ in mechanical properties, which allows users to select the optimum product that suits the individual needs.

Key Performance Properties
High tear resistance
Long service life
Chemical resistance
Easy mould release
Compatible with most moulding materials
Excellent detail reproduction
Room temperature cure
Broad product range to suit individual needs

Technique Data of RTV-2 Silicone Rubber in 15 shore A

 OPERRATING INSTRUCTION of RTV-2 Silicone Rubber in 15 shore A

1. Stir part A and part B with right mixing ratio evenly. And get the mixture for vacuum-pumping. (If there is no vacuumizer, you can just pour the mixture slowly from the corner so that less bubbles caused)

2. Enclose the product (the original model) with four plastic plates or wooden plates.

3. Clean your products and brush a layer of release agent(detergent or soap water) on your product.

4. Pour the mixture with correct mixing ratio into the model frame.

After about 2-4 hours, when the silicone cured, get out the original model, and there you get a finished addition cured silicone mold .  

SHELF LIFE: Twelve (12) months from date of shipment when stored at 24°C in original unopened packages.

PACKAGE: Packed in clean 20kg/pail,  200kg/pail.

Any questions about Silicone Rubber, Leah is at your service. 

TEL: 086-755-89212382

FAX: 086-755-89948030 

MOBILE: 086-189 3886 7561 

Website: www(dot)szrl(dot)net 

E-MAIL: hyji(at)szrl(dot)net

Skype: leahchou1214 

QQ: 189 3886 7561