100 - 40,000 kilogram
40,001 - 999,999 kilogram
group nameRTV-2 silicone rubber for molds making
Min Order100 kilogram
brand nameHong Ye silicone rubber
modelHY 625#
payment methodT/T, L/C, Westem Union
update timeTue, 05 Nov 2013 13:33:02 GMT
color white
certifications RoHS.MSDS.SGS ISO9001:2000
operation way pouring
hardness 25shore A
shrinkage low shrinkage
visicosity low visicosity
deformation no deformation
elasticity good elasticity
duplication times high duplication times
Min Order100 kilogram
Using area of RTV Molding Silicon
1. RTV molding silicon can used for poly resin crafts, PU crafts, PU resin crafts ,gypsum crafts ,unsaturated resin crafts, lighting and candles crafts ,plastic toy , stationery gifts crafts industry
2. RTV molding silicon is applicable for large statue Buddha, relievo furniture, furniture decorative materials, statues Buddha, artifacts copied, building decoration materials, large-scale cement mold
3. RTV molding siliconis intend for artificial fossils Factory, Europe component factory, simulation landscapes, animals and plants sculpture, sandstone crafts and so on.
RTV molding silicon for gypsum decoration feature:
1. Two-part silicon rubber: flowable liquid silicon and curing agent.
2. Cures at room temperature within 6-8 hours.
3. An exceptional fluidity and good operability, easy to demold.
4. Good tensile and tear strength, low shrinkage.
5. High duplication times
RTV molding silicon for gypsum decoration 630 TDS
Model | 630 |
Color | White |
Mixing ratio | 2~3% |
Pot life (mins) | 30~60 |
Curing time (hrs) | 2~5 |
Hardness ( shore A ) | 30±2 |
Tensile-strength (kgf/cm2 ) | 45 |
Tear-strength (KN/m) | 25 |
Viscosity(cps) | 27000 ± 3000 |
Shrinkage rate (%) | ≥350 |
Elongation(%) | ≤0.3 |
Why chose RTV molding silicon for gypsum decoration
RTV molding siliconis an effective and inexpensive way to create multiple copies of a master prototype part when you need a spec-like material for multiple sets, in a short timeframe, for less than a traditional tool would cost.
RTV molding Siliconeare capable of reproducing remarkable detail, and because of the flexibility of silicone, draft angles, inserts, and undercuts are not as critical as in other molding processes.
During operate the three important thing to pay attention :
1. weigh the liquid silicone rubber and curing agent exactly .
2. Stir the liquid silicone rubber and curing agent evenly.
3. We should choose the right hardness to making different size of product mold.
Any questions about Silicone Rubber, Leah is at your service.
TEL: 086-755-89212382
FAX: 086-755-89948030
MOBILE: 086-189 3886 7561
Website: www(dot)szrl(dot)net
E-MAIL: hyji(at)szrl(dot)net
Skype: leahchou1214
QQ: 189 3886 7561
网络文化经营许可证:浙ICP备14006100号-11 2007-2024 Tradevv.com. All rights reserved.