Molding Silicone, Liquid Molding Silicone for Plaster Statue Casting
- US $7.10
200 - 40,000 kilogram
- US $5.23
40,001 - 999,999 kilogram
group nameRTV-2 silicone rubber for molds making
-
Min Order200 kilogram
brand nameHong Ye silicone rubber
modelRTV 630#
payment methodT/T, L/C, Westem Union
-
update timeTue, 05 Nov 2013 13:34:27 GMT
Paramtents
Available color white
Certifications RoHS.MSDS
Operation way pouring way
Hardness 33 shore A
Curing time 4-5 hours
Mixing proportion of curing agent 100:5
Operating time 30-50
Viscosity (MPas -25 0C) 2000±2000
Tensile-strength(kgf /cm2 ) ≥40
Packging & Delivery
Min Order200 kilogram
Briefing
good fluidity
Lihgt viscosity
long reproducing age
approved SGS,Rosh
Detailed
Liquid Molding Silicone for Plaster Statue Casting
1.Mainly application of liquid molding silicone for plaster statue casting
liquid molding silicone rubber for plaster statue casting is a two part compound and curing with tin catalyst. As with a low viscosity,high tear strength and excellent duplication times,it's widely used for concrete casting,cement products casting,Making silicone rubber molds for artificial stone,garden statues and garden decorations.
2.Features of liquid molding silicone for plaster statue casting
a. liquid molding silicone rubber for art craft molding with SGS and ROSH approval
b. Curing agent arrange together as free charged
c.In liquid form and in various colors
d. With an exceptional fluidity and good operability.
e.Temperature and deformation resistance as well as low shrinkage.
f. High duplication times.
g. Sample orders are available
h. MOQ: 200KG
3.How to making mold with liquid silicone?
a. clear and smooth original moulds
b. brush on release agent
c. correct weigh accoring to the mixng ratio
d stir the two parts evenly
e. vacuum-pumping less than 10min
f. pouring or brushing
(Note: We are not recommend you to add silicone oil. If a special soft silicon mold or fine detailed and complex patterns products are required, 5%-10% silicone oil can be added to soften the mold for easy demould.)
4. FAQ
Why does the silicone mould appear to be dry outside but wet inside?
Because molding silicone rubber is a kind of condensation silicone rubber, which get solidified after absorbing moisture from the air. In order to provide a significant shelf-life for the silicon rubber, we will dry out the water in the silicon rubber.
Solution: Add 0.05% water into the silicon rubber and Stir over a low speed briefly when you use it.
Any questions about Silicone Rubber, Leah is at your service.
TEL: 086-755-89212382
FAX: 086-755-89948030
MOBILE: 086-189 3886 7561
Website: www(dot)szrl(dot)net
E-MAIL: hyji(at)szrl(dot)net
Skype: leahchou1214
QQ: 189 3886 7561
You need a product
You May Like
- Nearest port for product export
- Shenzhen, Guangzhou, Xiamen, Shanghai
- Delivery clauses under the trade mode
- FOB, CFR, CIF
- Acceptable payment methods
- T/T, L/C, Westem Union
- Export mode
- Export through agents