Liquid rtv silicone rubber for stone veneer molds

Liquid rtv silicone rubber for stone veneer molds

Appilication of Liquid rtv silicone rubber for stone veneer molds :

 Hongye  mold making RTV-2 silicon rubber is primarily intendedfor the reproduction of plate engrave ,human replica,for the mold making of poly resin crafts, PU crafts, PU resin crafts ,gypsum crafts ,unsaturated resin crafts, lighting and candles crafts ,plastic toy , stationery gifts crafts industry, a large statue Buddha, furniture, furniture decorative materials, statues Buddha, artifacts copied, building decoration materials, large-scale cement mold, artificial fossils Factory, Europe component factory, simulation landscapes, animals and plants sculpture, sandstone crafts and so on.

Liquid rtv silicone rubber for stone veneer molds features description

Hongye  mold making RTV-2 silicon rubber  is white or red flowing liquid with general hardness of 22-50A°after curing. Hongye mold making RTV-2 silicon rubber is a kind elastic silicon rubber mold which features with resistance to deformation, high-temperature, acid-alkali and expansion as well as high reproduction times, good tensile strength, tear strength and elongation.

Liquid rtv silicone rubber for stone veneer molds operations

If the customer wants to make large products and large size molds, the mold should be made of silicon rubber with high hardness. On the contrary, if the mold with fine and precision patterns, it should be made of silicon with low hardness. The amount of the curing agent depends on the actual requirements of the customer. If molds requiring fast drying and demold, more curing agent is needed; contrarily, if molds requiring slower drying and demold, less curing agent is needed.

Liquid rtv silicone rubber for stone veneer molds

(Note: our company does not recommend you to add silicone oil. If a special soft silicone mold or fine detailed and complex patterns products are required, 5%-10% silicone oil can be added to soften the mold for easy demold.)

Features of Liquid rtv silicone rubber for stone veneer molds

1. Good characteristics of easy-operation

2. Light viscosity and good flowability

3. Low shrinkage

4. Favorable tension

5. No deformation

6. Favorable hardness

7. High temperature resistance, acid and alkali-resistance and ageing resistance

Frequently asked questions of silicone molds making( plaster decoratives)

Why is the appearance of the Liquid rtv silicone rubber for stone veneer molds striate and unsmooth?

It is because the appearance of the product or the model itself is not perfect, and it has not been polished before the further operation. So when you make silicon molds, firstly you should polish the product, spray the mold spray evenly on the product. In this case, the problem can be avoided.

Why isn’t the Liquid rtv silicone rubber for stone veneer molds acid & alkali and aging resistant?

It is due to the addition of the silicon oil. Normally we do not advise our customers to add any silicon oil into the silicon rubber. If it is necessary, the ratio must be 5%-10%. 

Need any help on Need any help on Liquid rtv silicone rubber for stone veneer molds , please feel free to contact Ms Annie :
Tel: 0086-0755-89948294    
Mob:0086-0755-18938861891
E-mail: hyjx(at)szrl(dot)net   
skype: annie2012a