liquid mold silicone for precision molds making

FOB Price

US $12.35
200 - 40,000 kilogram
US $6.58
40,001 - 999,999 kilogram

group nameRTV-2 silicone rubber for molds making
Min Order200 kilogram
brand nameHong Ye silicone rubber
modelHY-E6350# Good price Silicone for Mold Making
payment methodT/T, L/C, Westem Union
update timeFri, 08 Nov 2013 15:13:54 GMT

contact supplier

Paramtents

color white
sample free
Model HY-E635
application for mold making
mix ratio 1:1
Appearance Translucent or white
Curing time 2-4h
Hardness (A°) 35±2
Density ( g/cm 3 ) 1.08
Viscosity (CS) (After mixed) 10000 ± 2000

Packging & Delivery

Min Order200 kilogram

Briefing

liquid mold silicone for precision molds making 1 .Normally Curing agent arrange together as free charge 2.can be reused much

Detailed

liquid mold silicone for precision molds making

Description

HY- E635# addition molding silicone is generally named two-components silicone rubber, Part A is a flowable liquid, part B is the curing agent. It features an exceptional fluidity and good operability. The mixing ratio is 1:1,mainly be suitable for making FDA molds application.

Applications,

HY- E635# addition molding silicone could be mainly used for making concrete stones, precision molds, PU molds, prototyping,for life casting, fabric finishing, seal for electronic components and solar circuit board, trademark decoration. etc.

Technique Data of HY-E635# molding silicone

Model	HY-E635#
Appearance	Translucent or white
Mixing Ratio	1:1
Operating time (Mins 25°C)	30 - 50
Curing time (Mins 25°C)	2-4h
Curing time (Mins 60°C)	4-5
Hardness (A°)	35±2
Density ( g/cm 3 )	1.08
Viscosity (CS) (Part A)	30000 ± 5000
Viscosity (CS) (Part B)	5000 ± 500
Viscosity (CS) (After mixed)	10000 ± 2000
Tensile-strength( kgf /cm2 )	100 ± 20
Tear-strength (kgf /cm2 )	15 ± 2
Elongation-break(%)	350 ± 50
Retractility(%)	≤0.1

OPERRATING INSTRUCTION of HY-E635# molding silicone:

1. Stir part A and part B with right mixing ratio evenly. And get the mixture for vacuum-pumping. (If there is no vacuumizer, you can just pour the mixture slowly from the corner so that less bubbles caused)

2. Enclose the product (the original model) with four plastic plates or wooden plates.

3. Clean your products and brush a layer of release agent(detergent or soap water) on your product.

4. Pour the mixture with correct mixing ratio into the model frame.

After about 2-4 hours, when the silicone cured, get out the original model, and there you get a finished addition cured silicone mold .

SHELF LIFE: Twelve (12) months from date of shipment when stored at 24°C in original unopened packages.

PACKAGE: Packed in clean 20kg/pail, 200kg/pail.

Any questions, please feel free to contact kelly:

TEL: 086-755-89948019

FAX: 086-755-89948030

MOBILE:086-18690907219

Website: www(dot)szrl(dot)net

E-MAIL: hyjm(at)szrl (dot)net