200 - 40,000 kilogram
40,001 - 999,999 kilogram
group nameRTV-2 silicone rubber for molds making
Min Order200 kilogram
brand nameHong Ye silicone rubber
modelHY630
payment methodT/T, L/C, Westem Union
update timeFri, 08 Nov 2013 15:21:36 GMT
Color White
silicone rubber:curing agent 2%-5%
Certification SGS,MSDS,RoHS
Material 100% silicone
Classification Chemical Auxiliary Agent
Appearance Fluid
Fluid mold making
HS code 39100000
Port shenzhen
Min Order200 kilogram
1. RTV-2 Rubber Silicone for Cement Decoration Mold Making application:
RTV silicone can be used for production of different sizes of polyurethane moulds,gypsum moulds,plaster moulds, cement moulds, resin moulds,polyresin moulds,PU resin moulds,wax moulds,stone moulds ,epoxy moulds,acrylic moulds,polyester moulds making
A. Decorative items: cornices moulding ,columns moulding,ornaments moulding,statues molding.....
B. Casting of funiture and decoration crafts molding
C. Construction: prefabrication of decrative features molding,pavement molding,paving stone moulding,urban
furniture molding,concrete products molding
D. Soap moulding,candles crafts moulding,toys moulding,sculpture moulding
2. RTV-2 Rubber Silicone for Cement Decoration Mold Making of TDS:
Model | 630# |
Appearance | white |
Mixing ratio (%) | 5% |
Operating time ( hours ) | 30~40 |
Curing time( hours ) | 3~4 |
Hardness (A°) | 30 |
Density ( g/cm 3) | 1.08 |
Viscosity (25 C°,mPa.s) | 22000~ 24000 |
Tensile-strength ( kgf/cm2 ) | 40 |
Tear-strength (kgf/cm ) | 25 |
Elongation-break(%) | ≥ 420 |
Retractility(%) | ≤0.25 |
3. RTV-2 Rubber Silicone for Cement Decoration Mold Making main features:
1. Good characteristics of easy-operation
2. Light viscosity and good flowability
3. Low shrinkage
4. Excellent tensile and tear strength
5. Favorable hardness
6. High temperature resistance, acid and alkali-resistance and ageing resistance
7. High duplication times
4. RTV-2 Rubber Silicone for Cement Decoration Mold Making frequently asked question:
Why does the silicone rubber molds appeared striately and unsmoothly?
It is because the appearance of the product or the model itself is not perfect, and it has not been polished before the further operation. So when you make silicon molds, firstly you should polish the product, spray the mold spray evenly on the product. In this case, the problem can be avoided.
To recommend suitable product for your application, we would be much appreciated to have your following information:
1. What is the material of your product?
2. What is the size of your product?
3. How do you make silicone mold, by pouring or brushing?
Need any help on silicone rubber, please feel free to contact Ms Kitty:
Tel:86-755-89948294
Mob:86-18938867593
E-mail: hysh(at)szrl(dot)net
Skype:kity-467707861
网络文化经营许可证:浙ICP备14006100号-11 2007-2024 Tradevv.com. All rights reserved.