Addition cure Silicon Rubber for concrete molds

  Main features  of   Addition cure Silicon Rubber for concrete molds

Addition cure Silicon Rubber had the advantage of low viscosity, good operability, exceptional fluidity  , high temperature resistance , excellent tensile and tear strength, as well as good elasticity.

Applications of  Addition cure Silicon Rubber for concrete molds

Addition silicon rubber mainly use for making precision molds, silicon insoles, food grade moldschocolate, cake moulds life casting silicon products, fabric finishing, seal for electronic components and solar circuit board, trademark decoration, baby nipples, cable accessories, etc.

Using Instructions  of  Addition cure Silicon Rubber for concrete molds 

1.       Applicable to the injection molding process

2.     Mixing component A with B evenly according its mix ratio, it is ready for use after degassing , it cures by heating up the temperature when pouring into the mold.

3.     The curing time is subject to the temperature, short time will be required under high temperature, long time will be required while the product with large thickness.

Package and storage precautions of  Addition cure Silicon Rubber for concrete molds 

1.       The material is packed in 20kg per drum.

2.     It is non-dangerous goods, should be stored at a cool and dry place, keep from sun and rain.

3.     The service life is 12 months, it can be used after reinspection when exceeding time limits.

4.     It is forbidden to mix with organic compounds of condensation cure silicone rubber, otherwise, the silicone rubber will not cure or vulcanize. It also should keep from organic compounds containing S,P,N, and metal salt of organic acid which causing silicon not cure or unvulcanized.

Any other information needed , pls feel free to contact omiga

0086-755-89948294 and mobile 0086-18938867575

mail:hyjw(at)szrl(dot)net

 Welcome to our website www dot szrl dot net