100 - 40,000 kilogram
40,001 - 999,999 kilogram
group nameRTV-2 silicone rubber for molds making
Min Order100 kilogram
brand nameHong Ye silicone rubber
modelHY625 liquid silicone
payment methodT/T, L/C, Westem Union
update timeFri, 08 Nov 2013 15:31:30 GMT
Other Names moulding silicone rubber
Grade Standard Agriculture Grade,Food Grade,Industrial Grade,Medicine Grade
Purity 100%
Appearance liquid rubber,white
Application for mold making
item No. HY625
Usage for toys ,crafts,plaster mold making
Mixing 4%
Viscosity (mPas -25 0C) 18000±2000
Tensile-strength(kgf /cm2 ) ≥36
Tear-strength (kgf /cm ) ≥27
Elongation-break(%) ≥ 450
Retractility(%) ≤0.25
Hardness (A°) 25
Min Order100 kilogram
RTV 2 silicone rubber make molds for plaster casting
FEATURES of RTV 2 silicone rubber:
1. Two-part of RTV 2 silicone rubber: flowable liquid silicon and curing agent.
2. RTV 2 silicone rubber Cures at room temperature within 5-46hours.
3. RTV 2 silicone rubber has An exceptional fluidity and good operability.
4. RTV 2 silicone rubber has good Temperature and deformation resistance as well as low shrinkage.
5. RTV 2 silicone rubber has High duplication times.
Model of RTV 2 silicone rubber:
RTV 2 silicone rubber RTV-630#:
Usage: Silicon rubber for PU/poly resin products, plaster, candles, gypsums crafts, cement products, concrete/architectural products, statuary, casting molds making, etc.
Model | 630# |
Appearance | white |
Mixing proportion of curing agent (%) | 5% |
Operating time (mins 25 0C ) | 20-40 |
Curing time(hours 25 0C) | 3-5 |
Hardness (A°) | 30±2 |
Density ( g/cm 3 ) | 1.08 |
Viscosity (Mpas -25 0C) | 21000~23000 |
Tensile-strength(kgf /cm2 ) | ≥40 |
Tear-strength (kgf /cm ) | ≥30 |
Elongation-break(%) | ≥ 450 |
Retractility(%) | ≤0.3 |
Operations for RTV 2 silicone rubber:
Step One to use RTV 2 silicone rubber: Take 100g of part A and add 2g of part B and mix the silicon rubber and the curing agent evenly.
Step Two to use RTV 2 silicone rubber: vacuum pumping
Without exception, this takes less than 10 minutes. Otherwise, it will cause cross linking reaction, and no more further steps will be available.
Step Three to use RTV 2 silicone rubber: Brushing cast & Perfusion Molding operation.
(Note:e do not recommend silicon oil. For special soft mold or molds with complex pattern or fine details, 5%-0% silicon oil can be added to condition the flexibility of the mold for convenience of release)
key words: RTV 2 silicone rubber, silicone rubber for mold making
网络文化经营许可证:浙ICP备14006100号-11 2007-2024 Tradevv.com. All rights reserved.