100 - 40,000 kilogram
40,001 - 999,999 kilogram
group nameRTV-2 silicone rubber for molds making
Min Order100 kilogram
brand nameHong Ye silicone rubber
modelHY-620 HY-625 HY-630 HY-640 HY-
payment methodT/T, L/C, Westem Union
update timeFri, 08 Nov 2013 15:32:14 GMT
color white red,green or as your need
payment TT /LC /West union
certificates Rohs,Msds,Sgs,ISO9001:2000
features good tension,low viscosity, suitable hardness
mix 1:1 or 10:1
promotion over 500KG 2% discount
environmental protection yes
material liquid silicone with two part
usage liquid silicone rubber for gypsum mould making
samples available
Min Order100 kilogram
liquid silicone rubber for gypsum
1. Good fluidity and excellent operation.
2. Good resistance to weather, temperature, aging, acid..
3. Excellent tear strength
liquid silicone rubber for gypsum products molding
Application of liquid ( RTV-2) silicone rubber for gypsum products molding
Liquid ( RTV-2) silicone rubber for gypsum products molding is mainly applicable to gypsum products, plaster,resin, cements mold is good for casting Plasters, Cements and resin, toy craftworks, gifts and stationery, large statues, duplication of cultural relics mold making, etc.
Description of liquid silicone rubber for gypsum products molding
liquid ( RTV-2) silicone rubber for gypsum products molding is flowing liquid with consistant quality in whatever color.
Liquid silicone rubber consists of two components, where in component A is silicone rubber, and component B is curing agent or vulcanizing agent.
Specification of liquid ( RTV-2) silicone rubber for gypsum products molding
Appearance: Yellow, red, green, white
Viscosity(cp): 16000-22000
Hardness(A): 23-28
Tensile strength(Mpa) ≥3.2
Tear-strength (kn/m) ≥18
Elongation break: (%)≥380
Curing agent mixed rate(%): 2-3
Operate time(min): 30
Curing time(hours): 2-4
Operation Instruction of liquid silicone rubber for gypsum products molding
1. liquid ( RTV-2) silicone rubber for gypsum products molding is applied to small products or products with fine patterns. The mold for the fine detailed and small products should be made of soft silicon to protect the products from easy breaking when demoulding.
2. If large product duplication or fabrication, the mold should be made of higher hardness silicone rubber so that the products made will not deform.
For more information, please feel free to contact with Mr Wenson:
TEL: 0086-755-89948019
FAX: 0086-755-89948030
MOBILE: 0086-18938867531
skype: wensona
E-mail:hyb(at)szrl(dot)net
website:www(dot)szrl(dot)net
网络文化经营许可证:浙ICP备14006100号-11 2007-2024 Tradevv.com. All rights reserved.