100 - 40,000 kilogram
40,001 - 999,999 kilogram
group nameRTV-2 silicone rubber for molds making
Min Order100 kilogram
brand nameHong Ye silicone rubber
modelHY-630#
payment methodT/T, L/C, Westem Union
update timeFri, 08 Nov 2013 15:32:33 GMT
model HY-630#
color white
mixing ratio 3~5%
Operating time (mins 25℃ ) 30~40mins
Curing time(hours 25 ℃) 3~4 hrs
Hardness (A°) 30±2
Density ( g/cm 3 ) 1.08
Viscosity (mPas -25℃) 25000±2000
Tensile-strength(kgf /cm2 ) ≥49
Tear-strength (kgf /cm ) ≥33
Min Order100 kilogram
Mainly application of Silicone Rubber
Silicone Rubber is a two part silicone rubber and curing with tin catalyst. As with a low viscosity, high strength and excellent duplication times, it's widely used for:
for plaster decoration duplication,
for gypsum sculpture reproduction,
for duplicating resin product with fine details,
for PU resin reproduction,
for wax molding,
for stone duplication ,
for epoxy moulds,
for pacrylic moulding,
for reproducing polyester craft
Features of Silicone Rubber
a.low viscosity
b.easy operation
c.long shelf life over 12 months
d.good tear strength and low shrinkage
e.curing at room temperature within 2-4hours
f.high duplication times and no deformation
Datasheet of silicone rubber for artificial stone mold making for reference:
Model | 625# | 630# | 638# |
Appearance | white | white | white |
Mixing ratio ( %) | 3~5% | 3~5% | 3~5% |
Pot life(min) | 30~60 | 30~60 | 30~60 |
Curing time (h) | 3~6 | 3~6 | 3~6 |
Viscosity (cP) | 19000±3000 | 24000±3000 | 35000±3000 |
Hardness (Shore A) | 25±2 | 30±2 | 35±2 |
Tensile strength (MPa) | ≥40 | ≥43 | ≥42 |
Tear-strength (kN/m) | ≥20 | ≥20 | ≥22 |
Elongation (%) | ≥380 | ≥380 | ≥400 |
shelf life | 8~12months | 8~12months | 8~12months |
Silicone Rubber for artificial stone molding
Silicone Rubber for artificial molding is a kind of flowable liquid silicone, the quality has nothing to do with the color. It consists of two components. Part A is a flowable liquid silicone rubber, part B is the curing agent. Firstly, after your previous work of dealing with the original model, take some liquid silicone rubber , add 2%-3% curing agent of the amount of silicon, and mix them evenly. Then after vacuum-pumping the mixture, you can pour it into the mold frame. The silicone mold will cured in 2-4 hours.
And more curing agent is needed; contrarily, if molds requiring slower drying and demould, less curing agent is needed.
Any questions about Silicone Rubber, Leah is at your service.
TEL: 086-755-89212382
FAX: 086-755-89948030
MOBILE: 086-189 3886 7561
Website: www(dot)szrl(dot)net
E-MAIL: hyji(at)szrl(dot)net
Skype: leahchou1214
QQ: 189 3886 7561
网络文化经营许可证:浙ICP备14006100号-11 2007-2024 Tradevv.com. All rights reserved.