mould making RTV-2 liquid silicone rubber

1. mould making RTV2 silicone rubber Specifications:

 Operation of mould making RTV2 silicone rubber

1. deal with original moulds

2. brush on release agent

3. correct weigh accoring to mixng ratio

4. stir the two component evenly

5. vacuum-pumping

6. pouring

 Features of mould making RTV2 silicone rubber :

(1) Silicon rubber for pad printing with SGS and ROSH approval

(2) Curing agent arrange together as free charged

(3) In liquid form and in various colors

(4) With an exceptional fluidity and good operability.

(5)Temperature and deformation resistance as well as low shrinkage.

(6) High duplication times.

(7) Sample orders are available

(8) MOQ: 100KG

Frequently asked questions of mould making RTV2 silicone rubber

1. Why should the silicone mold be reused only for a few times?
It can be due to the following reasons:
a. Adding too much silicone oil in to silicon rubber. Silicon oil is an additive which destroies the molecular weight of silicone rubber and reduce the tension and tear strength.
b. Using the silicon rubber with a high hardness to make molds for small sized products with delicate and intricate designs and the silicon rubber with a low hardness to makes molds for large sized products with simple designs.
(Notes: we should choose the silicon rubber specifically according to the requirements of our products to avoid this problem.)

The information just for reference, any interesting, any questions, pls feel free to contact Wenson :

Tel: + 86-755-89948006 or 86-18938867531

Fax: + 86-755-89948030

Web:www(dot)szrl(dot)net

E-mail:hyb(at)szrl(dot)net