200 - 40,000 kilogram
40,001 - 999,999 kilogram
group nameRTV-2 silicone rubber for molds making
Min Order200 kilogram
brand nameHong Ye silicone rubber
modelHong Ye 630 Silicone Rubber
payment methodT/T, L/C, Westem Union
update timeFri, 08 Nov 2013 15:44:01 GMT
item Mold making silicone rubber for garden statue
Certification SGS,RoHS,MSDS,FDA
Colour White/translucent/any color
Purity 100%
Application Molding silicone rubber
Sample Free
Technical support Free
EINECS No 39100000
Transportation By sea or by air
Hardness 28~32 shore A
Min Order200 kilogram
Mold making silicone rubber for garden statue molds:
Moulding silicone rubber compounds are two-component, room temperature-vulcanizing silicone (RTV) rubbers with excellent fidelity of reproduction. We offer suitable grades, condensation and addition cure, for making all kinds of molds, no matter how intricate, and for use with all types of reproduction material, whether wax, plaster, polyester and epoxy resins, urethane foam, or low-melting metal alloy. Thanks to their great flexibility and outstanding release properties, our mold making rubbers separate easily from the model. Their high resin resistance means they can be used over and over again. All of these excellent processing properties make our compounds indispensable for mold making; whether for industrial manufacturers or for artists and craftsmen.
Industrial mass production of silicone rubber for garden statue molds:
Reproductions and copies of mold making silicone rubber for garden statue molds
For concrete baluster molds
For garden statue molds
For decorative concrete molds
architectural plaster molds
Features of mold making silicone rubber for garden statue molds:
a.low viscosity
b.easy operation
c.long shelf life over 12 months
d.good tear strength and low shrinkage
e.curing at room temperature within 2-4hours
f.high duplication times and no deformation
How to making mold making silicone rubber for garden statue molds:
a. clear and smooth original moulds
b. brush on release agent
c. correct weigh accoring to the mixng ratio
d stir the two parts evenly
e. vacuum-pumping less than 10min
f. pouring or brushing
(Note: We are not recommend you to add silicone oil. If a special soft silicon mold or fine detailed and complex patterns products are required, 5%-10% silicone oil can be added to soften the mold for easy demould.)
Technical datasheets of moulding silicone rubber 630#:
Model 630#
Appearance white
Mixing ratio of curing agent (%)4%
Operating time (mins 25 0C ) 30-50mins
Curing time(hours 25 0C) 2-5 hrs
Hardness (A°) 30±2
Density ( g/cm3) 1.08
Viscosity (mPas -25 0C) 22000±1000
Tensile-strength(kgf /cm2) ≥49
Tear-strength (kgf /cm) ≥33
Elongation-break(%)≥ 460
Retractility(%)≤0.25 |
Package pic:
Any questions of RTV2 liquid silicone rubber , please feel free to contact Kelly:
E-mail: hyjm(at)szrl(dot)net
MSN:kelly6in(at)hotmail(dot)com
Skype:kelly619106
Tel: 086-755-89212382
Mob:86-18690907219
网络文化经营许可证:浙ICP备14006100号-11 2007-2024 Tradevv.com. All rights reserved.