200 - 40,000 kilogram
40,001 - 999,999 kilogram
group nameRTV-2 silicone rubber for molds making
Min Order200 kilogram
brand nameHong Ye silicone rubber
modelHY-924
payment methodT/T, L/C, Westem Union
update timeFri, 08 Nov 2013 15:48:34 GMT
Place China
Appearance Liquid silicone rubber
Packaging Detail 20kg/drum,200/drum
Delivery Time within 3 days after payment confirmed in our bank.
Supply Ability 8 Ton per Day
Payment Terms L/C,T/T
Certifications RoHS. MSDS.SGS ISO9001:2000
Port shenzhen
HS code 39100000
Min Order200 kilogram
Addition cure silicone rubber for tyre mold making application:
Addition cure silicone rubber for tyre mold makingis mainly used for prototyping mold making , such as ,used for tyre mold ,and it is used for food mold , such as chocolate mold , cake mold , bread mold , and concrete casting prodct . as well as product models with stable size and non-deformation.
Addition cure silicone rubber for tyre mold making description:
Addition cure silicone rubber for tyre mold making is generally named two-components silicone rubber, Part A and part B. It features an exceptional fluidity and good operability. The mixing ratio is 1:1 (10:1),mainly be suitable for making molds application.
Addition cure silicone rubber for tyre mold making characteristics:
*low shrinkage (less than 0.1% )
*high tensile and tear strength with high copy times
*easy for operation (mixing ratio at 1:1 /10:1)
*very good flow and easy for pouring operation
*Fast and non-shrink cure at room temperature which can be accelerated considerably by the application of heat.
Addition cure silicone rubber for tyre mold making standard datasheet:
Product | E-620 |
Appearance | Translucent |
Hardness(shore A) | 20±2 |
Mix ratio(A:B) | 1:1/10:1 |
Viscocity Part A(mPa.s) | 23000±2000 |
Viscocity Part B(mPa.s) | 3500±500 |
Tensile strength (kgf/cm2) | 45±5 |
Tear-strength (kN/m) | 20±2 |
Elongation(%) | 500±50 |
Pot life/working time (mins) | 30-40 |
Curing time/setting time (hrs) | 3-4hrs(25°C) 110-20mins(60°C) |
Shrinkage rate (%) | 0.1 |
Addition cure silicone rubber for tyre mold making operation instruction :
1. Pls clear the model and tool totally before operation to prevent cure inhibition.
2.Weigh the two part correctly by electronic weight in two separate container .
3. Mixing the two part in 1:1/10:1 and stir part A and part B evenly in 2-3 minutes .
4.And get the mixture for vacuum-pumping for de-air the bubble in around 2-3 minutes . (If there is no vacuum machine, pls pour the mixture carefully and slowly down the side of the mold frame so that less bubbles caused)
5. Enclose the product (the original model) with four plastic plates or wooden plates.
6. Clean your products and brush a layer of release agent(detergent or soap water) on your product.
7. Pour the vacuumed mixture into the model frame from the side of the mold frame .
Addition cure silicone rubber for tyre mold making package:
5kg/drum, 20kg/drum and 200kg/drum
Transportation regard as non-hazardous goods, with shelf life of half year, hermetically sealed, with prevention from being in contact with acid, alkaline, and other impurities.
Need any help on silicone rubber, please feel free to contact Ms Kitty:
Tel:86-755-89948294
Mob:86-15989267535
E-mail: hysh(at)szrl(dot)net
Skype:kity-467707861
You can also send me E-mail by scanning 2-Dimensional Bar Code below:
Addition cure silicone rubber for tyre mold making certification:
Addition cure silicone rubber for tyre mold making package:
Our factory:
网络文化经营许可证:浙ICP备14006100号-11 2007-2024 Tradevv.com. All rights reserved.