200 - 40,000 kilogram
40,001 - 999,999 kilogram
group nameRTV-2 silicone rubber for molds making
Min Order200 kilogram
brand nameHong Ye silicone rubber
modelHY625 HY630
payment methodT/T, L/C, Westem Union
update timeFri, 08 Nov 2013 15:50:20 GMT
Material 100% silicone
Color varies
HARDNESS 10-40A
Classification Chemical Auxiliary Agent
Appearance fluid
Certification SGS,MSDS,RoHS
Sample free
modes of transport by sea
Port shenzhen
Min Order200 kilogram
liquid molding silicon rubber for plaster productsapplication:
liquid molding silicon rubber for plaster productswith the hardness of 25 shore A, is specially suitable for large crafts mould making and duplication of poly resin crafts in pouring way, PU crafts, gypsum or plaster, unsaturated resin, lighting and candles crafts, plastic toy, stationery gifts crafts, large statue buddha, furniture decoration, cement, articficial stone, etc.(Advantages of pouring mold silicone rubber: light viscosity, pourable effort, good fluidity, easy-operation, good tension and high tear strength.)
liquid molding silicon rubber for plaster products feature:
1. Two-part silicon rubber:flowable liquid silicon and curing agent.
2. An exceptional fluidity and good operability.
3. Temperature and deformation resistance as well as low shrinkage.
4. High duplication times.
liquid molding silicon rubber for plaster products datasheets:
Model | Color | Mixing ratio (%) | Pot life (mins) | Demould time ( hrs) | Hardness ( A0 ) | Tensile-strength | Tear-strength | Viscosity (mPas) | Shrinkage rate (%) | Elongation (%) |
HongYe625# | white | 100 : 5 | 45-60 | 4-6 | 23-26 | 45kgf/cm2 | ≥ 29kgf/cm | 19500 | ≤0.3% | 450% |
HongYe630# | white | 100 :5 | 30-40 | 3-5 | 29-31 | 49kgf/cm2 | ≥ 33kgf/cm | 27000 | ≤0.3% | 490% |
Dowcorning3481 | white | 100 : 5 | 30-45 | 5-6 | 22-25 | 4.6Mpa | 23kN/m | 25000 | ≤0.5% | 520% |
Bluestar (3325 /585) | white | 100 : 5 | 20-60 | 6-24 | 25-28 | 4.2Mpa | 26kN/m | 35000 | ≤0.7% | 440% |
Wacker®M4503 | white | 100 : 5 | 30-90 | 10-20 | 25 | 5.0(N/mm² | > 20N/mm | 40000 | ≤0.5% | 350% |
SmoothonMoldMax®25 | white | 100 : 5 | 45 | 24 | 25 | 577psi | 130pli | 25000 | 002 in./in. | 375% |
liquid molding silicon rubber for plaster products frequently asked question:
Why is the silicone rubber mold oily?
Basically, molding silicone rubber doesn't contain any oil, so it won't be oily. The reasons for the oily molds can be deducted from the below 3 factors:
1. Added white oil, which is the compound of silicone oil and white oil. The white oil is not silicone oil but a kink of petrochemicals;
2. Added too much silicone oil. Normally, we donot advise our customers to add any silicone oil into silicone rubber. If necessary, the ratio must be 5%-10%;
3. Added too much curing agent, this is another reason for oily mold.
Need any help on silicone rubber, please feel free to contact Ms Kitty:
Tel:86-755-89948294
Mob:86-15989267535
E-mail: hysh(at)szrl(dot)net
Skype:kity-467707861
You can also send me E-mail by scanning 2-Dimensional Bar Code below:
liquid molding silicon rubber for plaster productspackage:
liquid molding silicon rubber for plaster products certification:
Our factory:
网络文化经营许可证:浙ICP备14006100号-11 2007-2024 Tradevv.com. All rights reserved.