Plaster panel moulds silicone rubber supplier

         Plaster panel moulds silicone rubber supplier

Plaster panel moulds silicone rubber application:

moulding silicone rubber is suitable for product duplication and mold making, such as
1)  concrete baluster , constuction ceiling domes,  Wave Pattern Tiles

 2) interior decorational crafts, plate engrave moulding, round frame , door and window frame, edging stone
3) resin crafts, unsaturated resin crafts.
4) gypsum cornices, pedestals, stone columns, pavilion reproduction

5) stationeries, plaster crafts, Buddhist statue crafts, etc.

Plaster panel moulds silicone rubber features:

a. good characteristics of easy-operation
b. light viscosity and good flowability
c. favorable tension
d. low shrinkage
e. no deformation

f. high reproducion times and durable effort
g. high temperature resistance, acid and alkali-resistance and ageing resistance

Plaster panel moulds silicone rubber specifications:

Brushable/Pourable

45 Minute to 1 hour working time, 24 hour cure; Cure rate can be adjusted by applying heat

Produces extremely fine detail from original

Self releasing, no mold release agent required for most applications

High heat range, up to 400-Degree F

easy to use, odor free, non-toxic, two component silicone rubber.

1. 1.       get necessary tools prepared, clean the original model thoroughly and fix it on the wooden board.
2. 2.       Brush a layer of mold releasing agent ( Vaseline) on the surface of the original product, cut proper size of hard paper board according to the height of model, enclose it.
3. 3.       Choose the right type/model of silicone based on size, structure, pattern and application of the product. Here we use silicone J-1225 (or J-1220) of Jenova Brand, add 2%-5% catalyst into the silicone, blend it evenly and then put it into vacuum pumping machine to deair.
4. 4.       Pour the vacuumized silicone onto the products, get products fully and evenly flooded.
5. 5.       after the silicone cured completely, pull down the paper boards, you can take out your products, then a mold is formed.
6. 6.       note: Generally, in this pouring way, you should use low-hardness silicone rubber to make molds, so it will be easier to demould and will not destroy the products.

How to avoid air bubbles in silicone molds and models?

1)apply a thin layer of silicone to the frame and the model before pouring the full amount;

2)raise the silicone about a foot in the air and pour it slowly;

3)remove air or deair the silicone rubber with a vacuum pump within 10 minutes.

4)hold the box at an angle and pour the silicone in on the raised end.

Packaging Details:   25kg/drum and 200kg/drum
Delivery Time:  within 3 days after payment confirmed in our bank.
Payment Terms:  L/C at sight, T/T, West Union  Notice of Electronic Potting silicone

Notice:1. sample is avalible
2. Reach certificate is avalible
3. MSDS, RHOS, GSG are avalible

4. HS code: 39100000

If you have any questions with Plaster panel moulds silicone rubber , pls feel free to contact Ms Aimee

MSN: aimeezhou055722(at)hotmail(dot)com
Skype:aimee055722

Email:hysz(at)szrl(dot)net
Tel:0086-755-89948006
Mob: 086-18938867541

Trademanager:cn200039753