200 - 40,000 kilogram
40,001 - 999,999 kilogram
group nameRTV-2 silicone rubber for molds making
Min Order200 kilogram
brand nameHong Ye silicone rubber
modelHY625 630
payment methodT/T, L/C, Westem Union
update timeFri, 08 Nov 2013 15:53:00 GMT
Certification SGS,MSDS,RoHS
HARDNESS 18-40A
Mixing Ratio 2%
Type liquid silicone rubber
Appearance Fluid
Application Mold making materials
EINECS No 39100000
Purity 100%
Curing agent 5%for free charged
Sample free
Min Order200 kilogram
Application of silicone rubber for mold making:
silicone rubber for mold making is mainly applicable to make the silicone mould for cultural relic duplication,architectural decoration,resin crafts, lighting ornaments, candles, statues, model design, product exploitation, etc.
Features of silicone rubber for mold making:
a. low viscosity, exceptional fluidity and easy operation
b. resistance to deformation, high-temperature
c. acid, alkali and ageing-resistance
d. low shrinkage
e. good tensile strength
f. high reproduction times
Datasheet of silicone rubber for mold making:
Model | Color | Mixing ratio (%) | Pot life (mins) | Demould time ( hrs) | Hardness ( A0 ) | Tensile-strength (kgf/cm2) | Tear-strength (kgf/cm) | Viscosity (cps) | Shrinkage rate (%) | Elongation (%) |
625# | white | 100 : 3 | 30 | 3-6 | 25 | ≥ 41 | ≥ 29 | 25000 | ≤0.3% | 450% |
630# | white | 100 : 3 | 30 | 3-6 | 30 | ≥ 47 | ≥ 35 | 28000 | ≤0.3% | 430% |
Instruction of silicone rubber for mold making:
Add curing agent of 2%-3% at the room temperature, the silicone rubber is still operational within 30 minutes, and in 2-3 hours.
1. Adding curing agent 1%, the silicone rubber can still be operated within 2.5 hours and can be Demoulded after 6-8 hours.
2. Adding curing agent 2%, the silicone rubber can still be operated within 50 minutes to 1 hour and can Be demoulded after 2-3 hours.
3. Adding curing agent 3%, the silicone rubber can still be operated within 28 - 30 minutes and can bedemoulded after 1.5-2 hours.
4. Adding curing agent 4%, the silicone rubber can still be operated within 10 - 15 minutes and can be demoulded after 1 -1.5 hours.
FAQ of silicone rubber for mold making :
Why the silicone rubber mold just can be reproduced for a few times?
It can be due to the following reasons:
a. Adding too much silicone oil in to silicon rubber. Silicon oil is an additive which destroies the molecular weight of silicone rubber and reduce the tension and tear strength.
b. Using the silicon rubber with a high hardness to make molds for small sized products with delicate and intricate designs and the silicon rubber with a low hardness to makes molds for large sized products with simple designs.
(Notes: we should choose the silicon rubber specifically according to the requirements of our products to avoid this problem.)
Need any help on silicone rubber, please feel free to contact Ms Kitty:
Tel:86-755-89948294
Mob:86-15989267535
E-mail: hysh(at)szrl(dot)net
Skype:kity-467707861
You can also send me e-mail by scanning 2 Dimensional Bar Code below:
Package of silicone rubber for mold making:
Certification of silicone rubber for mold making:
Our factory and lab:
网络文化经营许可证:浙ICP备14006100号-11 2007-2024 Tradevv.com. All rights reserved.