200 - 40,000 kilogram
40,001 - 999,999 kilogram
group nameRTV-2 silicone rubber for molds making
Min Order200 kilogram
brand nameHong Ye silicone rubber
model630#
payment methodT/T, L/C, Westem Union
update timeFri, 08 Nov 2013 15:53:07 GMT
Applicaiton RTV molding silicone rubber for plaster products
Color varies
Hardness 10-40A
Classification Chemical Auxiliary Agent
Appearance fluid silicone rubber
Certification SGS,MSDS,RoHS
Sample available
modes of transport by sea
HS code 39100000
Port shenzhen
Min Order200 kilogram
RTV molding silicone rubber for plaster products application:
RTV molding silicone rubber for plaster products with 30 shore A, is specially suitable for plaster decoration duplication,gypsum sculpture reproduction,duplicating resin product with fine details,PU resin reproduction,wax molding,stone duplication ,epoxy moulds,pacrylic moulding,reproducing polyester craft.
RTV molding silicone rubber for plaster products feature:
(1) RTV molding silicone rubber for plaster products with SGS and ROSH approval
(2) Curing agent arrange together as free charged
(3) In liquid form and in various colors
(4) With an exceptional fluidity and good operability.
(5)Temperature and deformation resistance as well as low shrinkage.
(6) High duplication times.
(7) Sample orders are available
RTV molding silicone rubber for plaster products datasheets:
Model | Color | Mixing ratio (%) | Pot life (mins) | Demould time ( hrs) | Hardness ( A0 ) | Tensile-strength | Tear-strength | Viscosity (mPas) | Shrinkage rate (%) | Elongation (%) |
630# | white | 100 :5 | 30-40 | 3-5 | 29-31 | 49kgf/cm2 | ≥ 33kgf/cm | 27000 | ≤0.3% | 490% |
Dowcorning3481 | white | 100 : 5 | 30-45 | 5-6 | 22-25 | 4.6Mpa | 23kN/m | 25000 | ≤0.5% | 520% |
Bluestar (3325 /585) | white | 100 : 5 | 20-60 | 6-24 | 25-28 | 4.2Mpa | 26kN/m | 35000 | ≤0.7% | 440% |
Wacker®M4503 | white | 100 : 5 | 30-90 | 10-20 | 25 | 5.0(N/mm² | > 20N/mm | 40000 | ≤0.5% | 350% |
SmoothonMoldMax®25 | white | 100 : 5 | 45 | 24 | 25 | 577psi | 130pli | 25000 | 002 in./in. | 375% |
RTV molding silicone rubber for plaster products operation way:
Step One:Take 100g of part A and add 2g of part B and mix the silicone rubber and curing agent evenly.
Step Two: vacuum pumping.Without exception, this step takes less than 10 minutes.
Note: The time for vacuum-pumping should be less than 3—5 mins , otherwise, once the silicone rubber has cross-link reaction during vacuumizing, it will not be operated.
Step Three: Brushing cast & Perfusion Molding operation
RTV molding silicone rubber for plaster products frequently asked question:
Why is the silicone rubber mold oily?
Basically, molding silicone rubber doesn't contain any oil, so it won't be oily. The reasons for the oily molds can be deducted from the below 3 factors:
1. Added white oil, which is the compound of silicone oil and white oil. The white oil is not silicone oil but a kink of petrochemicals;
2. Added too much silicone oil. Normally, we donot advise our customers to add any silicone oil into silicone rubber. If necessary, the ratio must be 5%-10%;
Need any help on silicone rubber, please feel free to contact Ms Kitty:
Tel:86-755-89948294
Mob:86-15989267535
E-mail: hysh(at)szrl(dot)net
Skype:kity-467707861
You can also send me E-mail by scanning 2-Dimensional Bar Code below:
RTV molding silicone rubber for plaster products package:
RTV molding silicone rubber for plaster products certification:
Our factory:
网络文化经营许可证:浙ICP备14006100号-11 2007-2024 Tradevv.com. All rights reserved.