200 - 40,000 kilogram
40,001 - 999,999 kilogram
group nameRTV-2 silicone rubber for molds making
Min Order200 kilogram
brand nameHong Ye silicone rubber
modelHY630# silicone rubber
payment methodT/T, L/C, Westem Union
update timeFri, 08 Nov 2013 15:53:29 GMT
color white silicon rubber
Mixing proportion of curing agent (%) 2%-3%
Operating time (hour 25 0C ) 0.5
Curing time(hours 25 0C) 6-8
Hardness (shore A) 28-30
Density ( g/cm 3) 1.09
Viscosity (CPS 25 0C) 18000-25000 silicon rubber
Tensile-strength(kgf /cm2 ) 37
Tear-strength (kgf /cm) 26
Elongation-break(%) 500
Min Order200 kilogram
American silicone rubber for gypsum moulding
1:American silicone rubber for gypsum moulding features:
1)high tensile &tear strength
2)Low linear shrinkage
3) Reasonable price
4)free curing agent
5)pourable and brushable viscosity
6) high reproduction times
7) free sample with CD on moulding operation
2. American silicone rubber for gypsum moulding:
American silicone rubber for gypsum moulding is primarily intended for concrete mouldings, glass reinforced concrete mouldings , precast concrete columns, balustrades, pilaster, baluster mouldings, statues, window and door frames, fences, columns, table sets, post caps for architectural decoration, interior and garden decorations.
It is also widely used for plaster ornaments moulding, plaster crafts works mold making and replication.
3. American silicone rubber for gypsum moulding:
American silicone rubber for gypsum moulding is popular in architectural market around the world. It has equivalent quality to that of Dow Corning brand as well as Bluestar, but price is more reasonable, moulding guide and patient after-sales service are
offered to your greatest satisfaction.
If the customer wants to make large products and large size molds, the mold should be made of silicon rubber with high hardness. On the contrary, if the mold with fine and precision patterns, it should be made of silicon with low hardness. The amount of the curing agent depends on the actual requirements of the customer. If molds requiring fast drying and demould, more curing agent is needed; contrarily, if molds requiring slower drying and demould, less curing agent is needed.
(Note: our company does not recommend you to add silicone oil. If a special soft silicon mold or fine detailed and complex patterns products are required, 5%-10% silicone oil can be added to soften the mold for easy demould.)
3.Frequently asked questions of American silicone rubber for gypsum moulding:
Why does the silicone rubber mold just has few duplication times?
The silicone rubber mold just has few duplication times is due to follwoing reasons: adding too much silicone oil which will destroy the molecular of silicone rubber; making the mold for small and fine detailed products with higher hardness silicone rubber which is easy to break; making the mold for large products with soft silicone rubber
which will reduce the tensile and tear strength of the mold, and the mold will have deformation. Thus, we should take the proper silicone rubber to make the mold for suitable products.
Packaging Details: 25kg/drum and 200kg/drum
Delivery Time: within 3 days after payment confirmed in our bank.
Payment Terms: L/C at sight, T/T, West Union
Supply Ability: 8 Ton per Day
If you have any questions with American silicone rubber for gypsum moulding, pls feel free to contact Ms Aimee
MSN: aimeezhou055722(at)hotmail(dot)com
Skype:aimee055722
Email:hysz(at)szrl(dot)net
Tel:0086-755-89948006
Mob: 086-18938867541
Trademanager:cn200039753
网络文化经营许可证:浙ICP备14006100号-11 2007-2024 Tradevv.com. All rights reserved.