200 - 40,000 kilogram
40,001 - 999,999 kilogram
group nameRTV-2 silicone rubber for molds making
Min Order200 kilogram
brand nameHong Ye silicone rubber
modelHY-615# silicone rubber
payment methodT/T, L/C, Westem Union
update timeFri, 08 Nov 2013 16:11:18 GMT
MOQ 200KG
payment T/T L/C Western Union
package 25kg/drum 200kg/drum
Brand Hong Ye silicone rubber
certificate ISO 9001:2000, SGS, MSDS, RoHS
Application artficial tone mold ,cement mold rock mold ,etc
molding silicone color all colors are available
HS Code 39100000
Feature liquid
Min Order200 kilogram
FEATURES of rtv silicon rubber statue molds
Two-parts, flowable liquid silicon & curing agent.
It gets cured at room temperature 250C within 4-5 hours.
An exceptional fluidity and good operability, easy to be demoulded.
Good tensile strength and tear strength, low shrinkage.
Suitable for both brushing and pouring methods of operations for medium & large sized molds making.
APPLICATIONS of rtv silicon rubber statue molds
This silicon rubber is perfect molding material, is for plaster/gypsum, concrete stone, fiber,
PU/poly resin, candles etc. products molding and casting. etc.
SPECIFICATIONS of rtv silicon rubber statue molds
Model | HY625 |
Appearance | Liquid |
Catalyst | 3-5% |
Operating time (mins 25 0C ) | 40-50 |
Curing time(hours 25 0C) | 4-5 |
Hardness (A°) | 25±2 |
Density ( g/cm 3 ) | 1.08 |
Viscosity (Mpas -25 0C) | 18000±3000 |
Tensile-strength(kgf /cm2 ) | ≥35 |
Tear-strength (kgf /cm ) | ≥20 |
Elongation-break(%) | ≥ 500 |
Retractility(%) | ≤0.2 |
Shelf life (month) | ≥12 |
USING INSTRUCTIONS for rtv silicon rubber statue molds
Step 1: prepare the original molds: you must make sure your original molds perfect.
fix it on a board. And fix the original mold on a board , then used four piece of board to enclose the original molds .
Step 2: Take 100 parts A and add 3 parts B and mix the silicone rubber and curing agent evenly.
Notes: Molding silicon rubber is a kind of flowing liquid and it contains two parts.
Part A is a kind of flowing liquid and part B is the curing agent. Remember to mix part A and part B evenly,
otherwise the silicon rubber will be partly solidified and this will give birth to difficulties in your final operation.
What’s more, the finished molds will meet a short life. All of these will cause a waste of silicon rubber.
Step 3: Vacuum pumping
Without exception, this step takes less than 10 minutes. Otherwise, it will cause cross linking reaction,
and no more further steps will be available.
Step 4: Pouring cast
It is suitable for simple products with the smooth surface. Without any mold lines,
which helps you save time and is easy for operation Evenly and slowly perfuse the mixed
silicone rubber into the square frame. After the cross linking reaction and the silicone rubber turns dry,
you can take the products out. Thus, the mold has been done.
Any more information abt rtv silicon rubber statue molds, pls feel free to contact Ms. Bella:
Mobile: 0086-18938867572
Tel: 0086-755-89948006
Fax: 0086-755-89948030
Website: www (dot) szrl (dot) net
Email:hysi(at)szrl(dot)net
网络文化经营许可证:浙ICP备14006100号-11 2007-2024 Tradevv.com. All rights reserved.