200 - 40,000 kilogram
40,001 - 999,999 kilogram
group nameRTV-2 silicone rubber for molds making
Min Order200 kilogram
brand nameHong Ye silicone rubber
modelRTV630
payment methodT/T, L/C, Westem Union
update timeFri, 08 Nov 2013 16:12:05 GMT
Available color white
Operation way pouring way
Hardness 30 shore A
Mixing proportion of curing agent 100:5
Curing time 4-5h
Pot life 20-30min
Viscosity (MPas -25 0C) 20000
Tensile-strength(kgf /cm2 ) 80
Certifications RoHS.MSDS.SGS ISO9001:2000
Min Order200 kilogram
Description of RTV Silicone Mold Making Rubber
RTV Silicone Mold Making Rubber is a type of silicone rubbermade from a two-component system (base plus curative; A+B) available in a hardness range of very soft to medium - usually from 15 Shore A to 40 Shore. RTV Silicones can be cured with either a platinum catalyst or a tin catalyst. Applications include low temperature overmolding, making molds for reproducing, and some optically clear grades have lens applications.
Features of RTV Silicone Mold Making Rubber
a.low viscosity
b.easy operation
c.long shelf life over 12 months
d.good tear strength and low shrinkage
e.curing at room temperature within 2-4hours
f.high duplication times and no deformation
Technical datasheets of RTV Silicone Mold Making Rubber
Model | Our625# A/B | Smooth-on Mold Max ® 25T | E625# | Mold Max® Silicones 25 | E620# |
Mixing proportion of catalyst(%) | 100:5 | 100:5 | 1:1 | 10:1 | Translucent |
Hardness (A°) | 23~25 | 25 | 25 ± 2 | 25 | 1:1 |
Density ( g/cm 3 ) | 1.12 | 1.18 | 1.08 | 1.18 | 20-30 |
Viscosity (25 C°,mPa.s) | 17 000—19 000 | 25,000 | 6000 ± 2000 | 25000 | 2-3h |
Tensile strength (Mpa) | 40±5 | 40 | 50±5 | 40 | 20±2 |
Tear-strength (KN/m ) | 25±2 | 23 | 25±2 | 14.5 | 1.08 |
Elongation-break(%) | ≥ 400 | 375 | 380 ± 50 | 375 | 6000 ± 2000 |
Working time (minutes) | 30~60 | 45 | 20~30 | 60 | 25 ± 2 |
Curing Time (hours) | 12~24 | 24 | 2~3 | 24 | 20 |
Liner shrinkage (%) | ≤0.3 | 0.2 | ≤0.1 | 0.1 | 380 ± 50 |
|
|
|
|
| ≤0.1 |
Attention for RTV Silicone Mold Making Rubber
If the mold makers want to make large products and large size molds, the mold should be made of silicone rubber with high hardness. On the contrary, if the products with fine and precision patterns, it should be made of silicon with low hardness.
The amount of the curing agent depends on the actual requirements of the customer. If molds requiring fast drying and demould, more curing agent is needed; Contrarily, if molds requiring slower drying and demould, less curing agent is needed.
it doesn't better to add silicone oil into silicone rubber. If a special soft silicon mold or fine detailed and complex patterns products are required, 5%-10% silicone oil can be added to soften the mold for easy demould. )
Shelf life and package
The shelf life can be reach to 12 months at room temperature about 25c in orignal package.
Our normally package is 25kg/pail and 200kg/pail.
Any questions of Silicone Rubber, please feel free to contact Miss Leah:
TEL: 086-755-89212382
FAX: 086-755-89948030
MOBILE: 086-189 3886 7561
Website: www(dot)szrl(dot)net
E-MAIL: hyji(at)szrl(dot)net
Skype: leahchou1214
QQ: 189 3886 7561
网络文化经营许可证:浙ICP备14006100号-11 2007-2024 Tradevv.com. All rights reserved.