Liquid RTV Condensation Cure Silicone for Mold Making
- US $7.56
200 - 40,000 kilogram
- US $5.23
40,001 - 999,999 kilogram
group nameRTV-2 silicone rubber for molds making
-
Min Order200 kilogram
brand nameHong Ye silicone rubber
modelHY625#
payment methodT/T, L/C, Westem Union
-
update timeFri, 08 Nov 2013 16:12:09 GMT
Paramtents
color white
certifications RoHS.MSDS.SGS ISO9001:2000
operation way pouring
hardness 25 shore A
shrinkage low shrinkage siliocne
visicosity low visicosity silicone
deformation no deformation silicone
elasticity good elasticity silicone
duplication times high duplication times silicone
Packging & Delivery
Min Order200 kilogram
Briefing
no deformation
good elasticity
high duplication times
RoSH, SGS
Detailed
Applications of Liquid RTV Condensation Cure Silicone for Mold Making
Liquid Condensation Silicone for Mold Making is primarily intended for poly resin crafts, PU crafts, PU resin crafts ,gypsum crafts ,unsaturated resin crafts, lighting and candles crafts ,plastic toy , stationery gifts crafts industry, a large statue Buddha, furniture, furniture decorative materials, statues Buddha, artifacts copied, building decoration materials, largescale cement mold, artificial fossils Factory, Europe component factory, simulation landscapes, animals and plants sculpture, sandstone crafts and so on.
Featuresof Liquid RTV Condensation Cure Silicone for Mold Making
1. non deformation
2. low shrinkage
3. high tear strength
4.favorable hardness
Datasheet of Liquid RTV Condensation Cure Silicone for Mold Making
Model | Our625# A/B | Smooth-on Mold Max ® 25T | E625# | Mold Max® Silicones 25 |
Mixing proportion of catalyst(%) | 100:5 | 100:5 | 1:1 | 10:1 |
Hardness (A°) | 23~25 | 25 | 25 ± 2 | 25 |
Density ( g/cm 3 ) | 1.12 | 1.18 | 1.08 | 1.18 |
Viscosity (25 C°,mPa.s) | 17 000—19 000 | 25,000 | 6000 ± 2000 | 25000 |
Tensile strength (Mpa) | 40±5 | 40 | 50±5 | 40 |
Tear-strength (KN/m ) | 25±2 | 23 | 25±2 | 14.5 |
Elongation-break(%) | ≥ 400 | 375 | 380 ± 50 | 375 |
Working time (minutes) | 30~60 | 45 | 20~30 | 60 |
Curing Time (hours) | 12~24 | 24 | 2~3 | 24 |
Liner shrinkage (%) | ≤0.3 | 0.2 | ≤0.1 | 0.1 |
FAQ.
Why the Liquid RTV Condensation Cure Silicone for Mold Making just can be reproduced for a few times?
It can be due to the following reasons:
a. Adding too much silicone oil in to silicon rubber. Silicon oil is an additive which destroies the molecular weight of silicone rubber and reduce the tension and tear strength.
b. Using the silicon rubber with a high hardness to make molds for small sized products with delicate and intricate designs and the silicon rubber with a low hardness to makes molds for large sized products with simple designs.
(Notes: we should choose the silicon rubber specifically according to the requirements of our products to avoid this problem.)
Any questions about Silicone Rubber, Leah is at your service.
TEL: 086-755-89212382
FAX: 086-755-89948030
MOBILE: 086-189 3886 7561
Website: www(dot)szrl(dot)net
E-MAIL: hyji(at)szrl(dot)net
Skype: leahchou1214
QQ: 189 3886 7561
You need a product
You May Like
- Nearest port for product export
- Shenzhen, Guangzhou, Xiamen, Shanghai
- Delivery clauses under the trade mode
- FOB, CFR, CIF
- Acceptable payment methods
- T/T, L/C, Westem Union
- Export mode
- Export through agents