100 - 40,000 kilogram
40,001 - 999,999 kilogram
group nameRTV-2 silicone rubber for molds making
Min Order100 kilogram
brand nameHong Ye silicone rubber
modelHY-620# moulding silicone
payment methodT/T, L/C, Westem Union
update timeFri, 08 Nov 2013 16:12:32 GMT
Color off-white/red/yellow/blue
Application Mold making silicone rubber
H.S. code 39100000
Shelf life 12 months
Appearance Liquid
Purity 100%
Catalyst 4% for free of charged
Molding method Pouring / brushing
MOQ 100kgs
Sample Free
Min Order100 kilogram
How to make the silicone mold by pouring way ?
Please feel free to send inquiry to us, we will send you the CD instruction,if you need technical support,welcome to contact me, Mrs Berry.
Brief Introduction of rtv2 silicone rubber
RTV-2 silicone rubber is a two component material,and it consist of Part A base silicone and Part B curing agent.When the two parts mix together and pour or brush on a object,the silicone base and curing agent can cure to be a silicone mold at room temperature;and 24 hours later,the silicone mold can be released from the object,and then the silicone mold can be poured into the following material to copy: plaster,polyurethane, PU, GRC, cement, resin, polyester, wax etc...
Extensive Applications of rtv2 silicone rubber
RTV-2 silicone rubber can be used in the duplication of cement molds, concrete stones, artificial stones, plaster molding, figures, art objects, decoration molding, GRC products, gypsum products, resin products, PU molds. Etc.
One Datasheet of rtv2 silicone rubber
Model | Color | Mixing ratio | Pot life (mins) | Demouled time (hrs) | Hardness(A0) | Tensile-strength (MPa) | Tear-strength KN/m) | Viscosity (mPa.s) | Elongation (%) |
630 | white | 100:3 | 30-50 | 4-6 | 30±2 | 4.0 | 26±2 | 25000±2000 | 420 |
640 | white | 100:3 | 30-50 | 4-6 | 40±2 | 3.8 | 27±2 | 15000±2000 | 480 |
E630 | translucent | 1:1 | 30-50 | 4-6 | 30±2 | 5.2 | 13±2 | 12000±2000 | 470 |
E642 | translucent | 1:1 | 30-50 | 4-6 | 40±2 | 6.2 | 12±2 | 14000±2000 | 350 |
Procedures of rtv2 silicone rubber
1. Make sure the surface of the original is clean and free of loose material.
2. Weight 100 Part A base and 2 parts of CA30 Curing Agent in a clean container.
3. Stir Part A base silicone before use thoroughly , as filler separation may occur upon prolonged storage.
4. Mix Part A and Part B evenly until the CA30 completely dispersed in the base.
5. Pour the mixed Part A base silicone and CA-30 curing agent as soon as possible onto the original
6. De-mold after 24 hours ,it is will improve the replicate times of silicone mold.
Note:It is strongly recommended that entrapped air be removed in a vacuum chamber, allowing the mix to completely expand and then collapse. After a further 1-2 mins under vacuum, the mix should be inspected and can be used if free of air bubbles. A volume increase of 3-5 times will occur on vacuum de-airing the mixture. So a suitably large container should be chosen.
More information about gypsum mouldmaking rtv2 silicone rubber, pls contact Ms Taylor:
Tel:+86-755-89212380
Mob: +86-18938867522
Skype: taylordl828
网络文化经营许可证:浙ICP备14006100号-11 2007-2024 Tradevv.com. All rights reserved.