200 - 40,000 kilogram
40,001 - 999,999 kilogram
group nameRTV-2 silicone rubber for molds making
Min Order200 kilogram
brand nameHong Ye silicone rubber
model625#
payment methodT/T, L/C, Westem Union
update timeFri, 08 Nov 2013 16:16:26 GMT
Certification SGS,MSDS,RoHS
Hardness 18-40A
Mixing Ratio 1:1
Type liquid silicone
Appearance Fluid
Application soap mold making
EINECS No 39100000
Purity 100%
Port shenzhen
Sample free
Min Order200 kilogram
Liquid Silicone Rubber for soap molds applications
Silicon rubber for molding making is primarily intended for poly resin crafts,PU crafts,PU resin crafts ,gypsum crafts ,unsaturated resin crafts, lighting and candles crafts ,plastic toy , stationery gifts crafts industry, a large statue Buddha, relievo furniture, furniture decorative materials, statues Buddha, artifacts copied, building decoration materials, large-scale cement mold, artificial fossils Factory,Europe component factory, simulation landscapes, animals and plants sculpture, sandstone crafts and so on
Liquid Silicone Rubber for soap molds features
Silicon rubber for mold making is white or red flowing liquid with general hardness of 18-40A°after curing. Molding silicon rubber is a kind elastic silicon rubber mold which features with resistance to deformation, high-temperature, acid-alkali and expansion as well as high reproduction times, good tensile strength ,tear strength and elongation.
Liquid Silicone Rubber for soap molds picture show
Liquid Silicone Rubber for soap molds datasheet
Model | Color | Mixing ratio (%) | Pot life (mins) | Demould time ( hrs) | Hardness ( A0 ) | Tensile-strength (kgf/cm2) | Tear-strength (kgf/cm) | Viscosity (cps) | Shrinkage rate (%) | Elongation (%) |
625# | white | 100 : 3 | 30 | 5-10 | 25 | ≥ 41 | ≥ 29 | 25000 | ≤0.3% | 450% |
Liquid Silicone Rubber for soap molds operations
Step One to use 625#: Take 100g of part A and add 100g of part B and mix the silicon rubber and the curing agent evenly.
Step Two to use 625#: vacuum pumping
Without exception, this takes less than 10 minutes. Otherwise, it will cause cross linking reaction, and no more further steps will be available.Step Three to use 625#: Molding operation.
Liquid Silicone Rubber for soap molds FAQS
What’s the limitations of silicone?
a. When the hardness of silicon rubber is lower than 15 shore A, the tension, the tear strength, the ageing resistance, acid and alkali-resistance of silicon rubber will reduce respectively.
b. When the hardness of silicon rubber is higher than 50 shore A, the tension and the tear strength of silicon rubber will reduce, and the solidified silicon mold will be easily broken.
Need any help on silicone rubber Pleasr feel free to contact Ms Crystal
Tel:86-755-89948294
Mob:86-15989267509
E-mail: hyxd(at)szrl(dot)net
Skype:shisi1991
网络文化经营许可证:浙ICP备14006100号-11 2007-2024 Tradevv.com. All rights reserved.