100 - 40,000 kilogram
40,001 - 999,999 kilogram
group nameRTV-2 silicone rubber for molds making
Min Order100 kilogram
brand nameHong Ye silicone rubber
modelHY-625
payment methodT/T, L/C, Westem Union
update timeFri, 08 Nov 2013 16:18:40 GMT
Appearance white
Mixing proportion of curing agent (%) 5%
Operating time (mins 25℃ ) 30~40
Curing time(hours 25℃) 3~4
type of the silicone condersation cure silicone
hardness 25 shore A
certification SGS
Origin Shenzhen China
MOQ 200kg
shelf life 8~10 month
Min Order100 kilogram
Appilication of Liquid RTV Silicone for Candle Mold Making
Liquid RTV Silicone for Candle Mold Making is primarily intended for the reproduction of plate engrave ,human replica,for the mold making of poly resin crafts, PU crafts, PU resin crafts,gypsum crafts ,unsaturated resin crafts, lighting and candles crafts ,soap mold,plastic toy , stationery gifts crafts industry, a large statue Buddha, furniture, furniture decorative materials, statues Buddha, artifacts copied, building decoration materials, large-scale cement mold, artificial fossils Factory, Europe component factory, simulation landscapes, animals and plants sculpture, sandstone crafts and so on.
Features of Liquid RTV Silicone for Candle Mold Making
Liquid Silicone for Candle Mold Making is white or red flowing liquid with general hardness of 22-50A°after curing. Hongye mold making liquid silicon rubber is a kind elastic silicon rubber mold which features with resistance to
non-deformation
high-temperature
acid-alkali and expansion
high reproduction times
good tensile strength
tear strength and elongation.
Operations of Liquid RTV Silicone for Candle Mold Making
If the customer wants to make large products and large size molds, the mold should be made of silicon rubber with high hardness. On the contrary, if the mold with fine and precision patterns, it should be made of silicon with low hardness. The amount of the curing agent depends on the actual requirements of the customer. If molds requiring fast drying and demold, more curing agent is needed; contrarily, if molds requiring slower drying and demold, less curing agent is needed.
(Note: our company does not recommend you to add silicone oil. If a special soft silicone mold or fine detailed and complex patterns products are required, 5%-10% silicone oil can be added to soften the mold for easy demold.)
mold silicone rubber for candle mold reproduction
TDS of the liquid silicone which is suitable to make candle mold.
Model | 620# | HY-E620# |
Appearance | White | Translucent |
Mixing proportion of curing agent (%) | 4% | 1:1 |
Operating time (mins 25 0C ) | 40 | 20-30 |
Curing time(hours 25 0C) | 3~4 | 2-3h |
Hardness (A°) | 20±2 | 20±2 |
Density ( g/cm 3) | 1.08 | 1.08 |
Viscosity (mPas @ 25 0C) | 13000~15000 | 6000 ± 2000 |
Tensile-strength(kgf /cm2 ) | ≥36 | 25 ± 2 |
Tear-strength (kgf /cm) | ≥23 | 20 |
Elongation-break(%) | ≥ 440 | 380 ± 50 |
Frequently asked questions of Liquid Silicone for Candle Mold Making
why the candle made by our silicone inflaming retarding?
we may check this problem with the wick we used while making the candle. Usually, the canble would be cooling in the water after shaping up. During this process, the wick with poor quality would be soaked thus the candle may not be lighted or the flame would be crushed our while burning.
Any questions about Silicone Rubber, Leah is at your service.
TEL: 086-755-89212382
FAX: 086-755-89948030
MOBILE: 086-189 3886 7561
Website: www(dot)szrl(dot)net
E-MAIL: hyji(at)szrl(dot)net
Skype: leahchou1214
QQ: 189 3886 7561
网络文化经营许可证:浙ICP备14006100号-11 2007-2024 Tradevv.com. All rights reserved.