RTV-2 silicon for making mold in pouring way

RTV-2 silicon for making mold in pouring way applications

RTV-2 silicon for making mold in pouring way is maily used in Concrete ,soap ,Toys , ceilings ,gift, house decoration, plate engrave, sculpture replica, arts & crafts, resin crafts, poly resin crafts,  resin crafts, candle crafts, plastic crafts,plaster crafts and Buddhist statue crafts cement products, plastic toys,  handicrafts, large-scale sculpture, reproduction of cultural relic, shoe sole molds, and so on.

Advantages of RTV-2 silicon for making mold in pouring way

a. Hardness from 10 shore A to 60 shore A

b. Low viscosity good for casting pouring mold, add thickening agent, the silicone can be brushable with nice operation ability.

c. High temperature resistance, high duplication times

d. Excellent tear and tensile strength

f. Different catalyst (hardener) with different pot life and curing time,you can according your products to choose the catalyst(hardener) and the viscosity.

(Note: Our company does not recommend you to add silicone oil into RTV-2 silicon for making mold. If a special soft silicon mold or fine detailed and complex patterns products are required, 5%-10% silicone oil can be added to soften the mold for easy demould.)

Frequently asked questions of RTV-2 silicon for making mold in pouring way

Why is the tear strength of the RTV-2 silicon for making molds weak?
In order to reduce the viscosity of RTV-2 silicon for making mold in pouring way and pursue a good quality, you may add a lot of silicone oil into the RTV-2 silicon for making mold in pouring way when making molds. In fact, it might have just the opposite effect. The tension and the tear strength will be reduced badly with the addition of silicon oil. And the silicon molds will be in a weak and flimsy manner.

Anymore information about the RTV-2 silicon for making mold in pouring way, please feel free to contact Ms Apple

TEL: 0086-755-89948013

MOBILE: 0086-15889446131

eileen at szrl dot net