RTV 2 molding silicone rubber

Application of RTV 2 molding silicone rubber:

RTV 2 molding silicone rubber is mainly applied for making various molds:

RTV 2 molding silicone rubber can used to reproduce concrete or cement, gypsum, gypsum, architecture, decorative arts and crafts, big statue, cultural relic product, etc.

RTV 2 molding silicone rubber can used to reproduce poly resin, epoxy, polyurethane-polymer, plastic toy, gift and stationery.

RTV 2 molding silicone rubber can also used to reproduce soaps, candle & lighting.

FEATURES of RTV 2 molding silicone rubber:

1. RTV 2 molding silicone rubber has an exceptional fluidity and good operability.
2. RTV 2 molding silicone rubber has good Temperature and deformation resistance as well as low shrinkage.
3. RTV 2 molding silicone rubber has High duplication times.

RTV 2 molding silicone rubber

RTV 2 molding silicone rubber is primarily intended for poly resin crafts, PU crafts, PU resin crafts , gypsum crafts , unsaturated resin crafts, lighting and candles crafts , plastic toy , stationery gifts crafts industry, a large statue Buddha, furniture, furniture decorative materials, statues Buddha, artifacts copied, building decoration materials, large-scale cement mold, artificial fossils Factory, Europe component factory, simulation landscapes, animals and plants sculpture, sandstone crafts and so on.

Features of RTV 2 molding silicone rubber:

RTV 2 molding silicone rubber is Good characteristics of easy-operation

RTV 2 molding silicone rubber is Ligh viscosity and good flowability

RTV 2 molding silicone rubber is Low shrinkage

RTV 2 molding silicone rubber is Favorable tension

RTV 2 molding silicone rubber is No deformation

RTV 2 molding silicone rubber is Favorable hardness

RTV 2 molding silicone rubber is High temperature resistance, acid and alkali-resistance and ageing resistance

Operations of RTV 2 molding silicone rubber:

Step One: Take 100g of part A and add 2g of part B and mix the silicone rubber and curing agent evenly.

Notes: Moulding silicon rubber is a kind of flowing liquid and it contains two parts. Part A is a kind of white flowing liquid and part B is the curing agent. Remember to mix part A and part B evenly, otherwise the silicon rubber will be partly solidified and this will give birth to difficulties in your final operation. What is more, the finished moulds will meet a short life. All of these will cause a waste of silicon rubber.

Step Two: vacuum pumping

Without exception, this step takes less than 10 minutes. Otherwise, it will cause , and no more further steps will be available

Step Three: Perfusion Molding

The perfusion molding is an easy way to make molds, it is  Slowly and evenly perfuse the mixed silicon rubber into the square frame. After the cross linking reaction.

RTV 2 molding silicone rubber dispaly

Molding silicone rubber is white or red flowing liquid with general hardness of 22-50A°after curing. Molding silicone rubber is a kind elastic silicon rubber mold which features with resistance to deformation, high-temperature, acid-alkali and expansion as well as high reproduction times, good tensile strength, tear strength and elongation.

RTV 2 molding silicone rubber
f the customer wants to make large products and large size molds, the mold should be made of silicone rubber with high hardness. On the contrary, if the mold with fine and precision patterns, it should be made of silicon with low hardness. The amount of the curing agent depends on the actual requirements of the customer. If molds requiring fast drying and demold, more curing agent is needed; contrarily, if molds requiring slower drying and demold, less curing agent is needed.

(Note: our company does not recommend you to add silicone oil. If a special soft silicone mold or fine detailed and complex patterns products are required, 5%-10% silicone oil can be added to soften the mold for easy demold.)

if you are interested in RTV 2 molding silicone rubber:please feel free and send inquiry to us for more details.

For more information, please feel free to contact with Mr Wenson:
TEL: 0086-755-89948019
FAX: 0086-755-89948030
MOBILE: 0086-18938867531

skype: wensona

E-mail:hyb(at)szrl(dot)net

website:www(dot)szrl(dot)net

Place of Origin: Guangdong China

Brand Name: Hong Ye Silicone Rubber

Model Number : HY625 HY630 silicone rubber

HS code: 39100000

Shelf life: one year at cool dry place

Shipping Terms: Ocean freight/ Air lift

Minimum Order Quantity: 200 Kilogram

Price: FOB shenzhen USD 5.8~7.5

Packaging Details: vacuumed thick PE bag inside and iron barrel outside

                 25kg/drum and 200kg/drum

Delivery Time: within 3 days after payment confirmed in our bank.

Payment Terms: L/C at sight, T/T, Western Union

Supply Ability: 8 Ton per Day

Certifications: RoHS. MSDS. SGS. ISO.9001:2000