Addition molding silicone

FOB Price

US $16.50
200 - 40,000 kilogram
US $12.90
40,001 - 999,999 kilogram

group nameAddition cure silicone rubber
Min Order200 kilogram
brand nameHong Ye silicone rubber
modelSilicon rubber for Addition
payment methodT/T, L/C, Westem Union
update timeFri, 08 Nov 2013 16:37:56 GMT

contact supplier

Paramtents

Appearance Fluid
Color Translucent

Packging & Delivery

Min Order200 kilogram

Briefing

It features an exceptional fluidity and good operability,mainly be suitable for making molds application.

Detailed

Addition Molding Silicone

Description

Addition molding siliconeis generally named two-components silicone rubber, Part A and part B. It features an exceptional fluidity and good operability. The mixing ratio is 1:1,mainly be suitable for making molds application.

Applications

Addition molding silicone could be mainly used for making concrete stones, precision molds, PU molds, resin molds, gypsum casting, candle molding,for life casting, fabric finishing, seal for electronic components and solar circuit board, trademark decoration. etc.

Technique Data of HY-E642# molding silicone

Model	HY-E642#
Appearance	Translucent
Mixing Ratio	1:1
Operating time (Mins 25°C)	30 - 40
Curing time (Mins 25°C)	120 - 240
Curing time (Mins 60°C)	20 - 30
Hardness (A°)	42±2
Density ( g/cm 3 )	1.08
Viscosity (CS) (Part A)	30000 ± 5000
Viscosity (CS) (Part B)	5000 ± 500
Viscosity (CS) (After mixed)	10000 ± 2000
Tensile-strength( kgf /cm2 )	100 ± 20
Tear-strength (kgf /cm2 )	15 ± 2
Elongation-break(%)	350 ± 20
Shrinkage(%)	≤0.1

Addition molding silicone

OPERRATING INSTRUCTION of HY-E642# molding silicone:

1. Stir part A and part B with right mixing ratio (1:1) evenly. And get the mixture for vacuum-pumping. (If there is no vacuumizer, you can just pour the mixture slowly from the corner so that less bubbles caused)

2. Enclose the product (the original model) with four plastic plates or wooden plates.

3. Clean your products and brush a layer of release agent(detergent or soap water) on your product.

4. Pour the mixture with correct mixing ratio into the model frame.

After about 2-4 hours, when the silicone cured, get out the original model, and there you get a finished addition cured silicone mold .

SHELF LIFE:Twelve (12) months from date of shipment when stored at 24°C in original unopened packages.

PACKAGE:Packed in clean 20kg/pail+20kg/pail, 200kg/pail+200kg/pail.

Any further information, please feel free to contact Ms. Judy

MOBILE:086-18938867591

QQ: 18938867591

Skype: judy.zhao723