100 - 40,000 kilogram
40,001 - 999,999 kilogram
group nameAddition cure silicone rubber
Min Order100 kilogram
brand nameHong Ye silicone rubber
modelHY-E642 silicon
payment methodT/T, L/C, Westem Union
update timeFri, 08 Nov 2013 16:38:28 GMT
color:any transport:by sea
Certifications:RoHS.SGS ISO9001:2000 provide curing agent for free
Min Order100 kilogram
Hongye HY-E642 Addition Molding Silicone for life casting copied
HY-E642 Addition Molding Silicone for gypsum casting copied Applications,
HY- E642# addition molding silicone could be mainly used for making concrete stones, precision molds, PU molds, resin molds, gypsum casting,candle molding,for life casting, fabric finishing, seal for electronic components and solar circuit board, trademark decoration. etc.
HY-E642 Addition Molding Silicone for gypsum casting copied Description
HY- E642# addition molding silicone is generally named two-components silicone rubber, Part A and part B. It features an exceptional fluidity and good operability. The mixing ratio is 1:1,mainly be suitable for making molds application.
Technique Data of HY-E642 Addition Molding Silicone for gypsum casting copied:
Model | HY-E642# |
Appearance | Translucent |
Mixing Ratio | 1:1 |
Operating time (Mins 25°C) | 30 - 40 |
Curing time (Mins 25°C) | 120 - 240 |
Curing time (Mins 60°C) | 20 - 30 |
Hardness (A°) | 42±2 |
Density ( g/cm 3 ) | 1.08 |
Viscosity (CS) (Part A) | 30000 ± 5000 |
Viscosity (CS) (Part B) | 5000 ± 500 |
Viscosity (CS) (After mixed) | 10000 ± 2000 |
Tensile-strength( kgf /cm2 ) | 100 ± 20 |
Tear-strength (kgf /cm2 ) | 15 ± 2 |
Elongation-break(%) | 350 ± 20 |
Retractility(%) | ≤0.1 |
OPERRATING INSTRUCTION of HY-E642# molding silicone:
1. Stir part A and part B with right mixing ratio (1:1) evenly. And get the mixture for vacuum-pumping. (If there is no vacuumizer, you can just pour the mixture slowly from the corner so that less bubbles caused)
2. Enclose the product (the original model) with four plastic plates or wooden plates.
3. Clean your products and brush a layer of release agent(detergent or soap water) on your product.
4. Pour the mixture with correct mixing ratio into the model frame.
After about 2-4 hours, when the silicone cured, get out the original model, and there you get a finished addition cured silicone mold .
HY-E642 Addition Molding Silicone for gypsum casting copied SHELF LIFE:
Twelve (12) months from date of shipment when stored at 24°C in original unopened packages.
Contations on HY-E642 Addition Molding Silicone for gypsum casting copied:
Any more information , please fell free to contact with Miss sara
Tel: 0086-755-85224692
Fax: 0086-755-89948030
Mobile:0086-13823674309
HY-E642 Addition Molding Silicone for gypsum casting copied
:
网络文化经营许可证:浙ICP备14006100号-11 2007-2024 Tradevv.com. All rights reserved.