100 - 40,000 kilogram
40,001 - 999,999 kilogram
group nameAddition cure silicone rubber
Min Order100 kilogram
brand nameHong Ye silicone rubber
modelHY-E625 silicon
payment methodT/T, L/C, Westem Union
update timeFri, 08 Nov 2013 16:38:31 GMT
color:any transport:by sea
Certifications:RoHS.SGS ISO9001:2000 provide curing agent for free
Port shenzhen
MOQ 200KG
Sample available
Payment T/T,L/C
HS 3910 0000
Application mold making
Certifications: RoHS.SGS ISO9001:2000
Min Order100 kilogram
Hongye HY-E625 addition silicon for shoe insoles making
manual mold silicon for shoe insoles making Applications:
HY- E625# addition molding silicone could be mainly used for making concrete stones, precision molds, PU molds, for life casting, fabric finishing,shoe insoles making, seal for electronic components andsolar circuit board, trademark decoration. etc.
manual mold silicon for shoe insoles making Description:
HY-E625# addition molding silicone is generally named two-components silicone rubber, Part A is a flowable liquid, part B is the curing agent. It features an exceptional fluidity and good operability. The mixing ratio is 1:1, mainly be suitable for making molds application.
manual mold silicon for shoe insoles making Technique Data:
Model | Appearance | Viscosity (cps) | Hardness (A°) | Tensile Strength (Mpa) | Tear Strength (KN/m) | Elongation (%) | Mixing ratio (%) | Pot life(H) | Demould time(H) |
218 | White | ≤15000 | 18±2 | ≥1.3 | ≥5 | ≥300 | 2~3 | 0.5~2 | 2~4 |
manual mold silicon for shoe insoles making OPERRATING INSTRUCTION:
1. Clean your products and brush a layer of release agent (detergent or soap water) on the surface of your product.
Note: The model should not have been used to make molds for tin cured silicone rubber before. Otherwise, the addition silicone will not get cured. (Use a new model to test it)
2. Enclose the product (the original model) with four plastic plates or wooden plates.
3. Mixing part A and part B with 1:1 mixing ratio and stir evenly. And get the mixture for vacuum-pumping. (If there is no vacuumizer, you can just pour the mixture slowly from the corner so that less bubbles caused)
manual mold silicon for shoe insoles making
4. Pour the mixture into the model frame.
After about 2-4 hours, when the silicone cured, get out the original model, and there you get a finished addition cured silicone mold .
manual mold silicon for shoe insoles making SHELF LIFE:
Twelve (12) months from date of shipment when stored at 24°C in original unopened packages.
PACKAGE:
Packed in clean 20kg/pail, 200kg/pail.
Any more information , please fell free to contact with Mr Allen ,
Tel: 0086-755-89212365
Fax: 0086-755-89948030
Mobile:0086-18938861889
manual mold silicon for shoe insoles making
网络文化经营许可证:浙ICP备14006100号-11 2007-2024 Tradevv.com. All rights reserved.