Addition Cure Silicone

FOB Price

US $15.00
200 - 40,000 kilogram
US $11.00
40,001 - 999,999 kilogram

group nameAddition cure silicone rubber
Min Order200 kilogram
brand nameHong Ye silicone rubber
modelE-642 silicone rubber
payment methodT/T, L/C, Westem Union
update timeFri, 08 Nov 2013 16:44:09 GMT

contact supplier

Paramtents

color translucent
feature liquid
Sample available
Purity 100%
Certifications RoHS, MSDS, SGS, ISO9001:2000
Type addition cure silicone rubber
Mixing ratio 1:1
Pot life/working life 30-40 minutes
Curing time 3-5 hours
HS Code 39100000

Packging & Delivery

Min Order200 kilogram

Briefing

Can solve the problem of not lighting of the candles and the problem of sticky and white stains on the surface of cement &

Detailed

Addition Cure Silicone

Addition Cure Silicone

Applications of Addition Cure Silicone :

Addition Cure Silicone could be mainly used for making concrete stones, precision molds, PU molds, resin molds, gypsum casting, candle molding,for life casting, fabric finishing, seal for electronic components and solar circuit board, trademark decoration. etc.

Technique Data of Addition Cure Silicone :

Model	HY-E642#
Appearance	Translucent
Mixing Ratio	1:1
Operating time (Mins 25°C)	30 - 40
Curing time (Mins 25°C)	120 - 240
Curing time (Mins 60°C)	20 - 30
Hardness (A°)	42±2
Density ( g/cm 3 )	1.08
Viscosity (CS) (Part A)	30000 ± 5000
Viscosity (CS) (Part B)	5000 ± 500
Viscosity (CS) (After mixed)	10000 ± 2000
Tensile-strength( kgf /cm2 )	100 ± 20
Tear-strength (kgf /cm2 )	15 ± 2
Elongation-break(%)	350 ± 20
Retractility(%)	≤0.1

OPERRATING INSTRUCTION of Addition Cure Silicone :

1. Stir part A and part B with right mixing ratio (1:1) evenly. And get the mixture for vacuum-pumping. (If there is no vacuumizer, you can just pour the mixture slowly from the corner so that less bubbles caused)

2. Enclose the product (the original model) with four plastic plates or wooden plates.

3. Clean your products and brush a layer of release agent(detergent or soap water) on your product.

4. Pour the mixture with correct mixing ratio into the model frame.

After about 2-4 hours, when the silicone cured, get out the original model, and there you get a finished addition cured silicone mold .

Our factory: