100 - 40,000 kilogram
40,001 - 999,999 kilogram
group nameAddition cure silicone rubber
Min Order100 kilogram
brand nameHong Ye silicone rubber
modelHigh Translucent silicone Q642#
payment methodT/T, L/C, Westem Union
update timeFri, 08 Nov 2013 16:48:45 GMT
Color High Translucent
Certificate RoHS, SGS, MSDS, Reach ,ISO9001:2000
Package Vacuum Pumping Package
Shelf life 12 months
Shape Liquid Material
application for mold making
delivery within 3 days after payment
mixing ratio 1:1
payment terms T/T, L/C
Min Order100 kilogram
High Translucent addition silicon rubber
Applications of High Translucent addition silicon rubber
HY- Q642# high translucent silicon could be mainly used for making concrete stones, precision molds, PU molds, resin molds, gypsum casting, candle molding,for life casting, fabric finishing, seal for electronic components and solar circuit board, trademark decoration. etc.
Description of High Translucent addition silicon rubber
HY- Q642# high translucent silicon is generally named two-components silicone rubber, Part A and part B. It features an exceptional fluidity and good operability. The mixing ratio is 1:1,mainly be suitable for making molds application.
Addition Silicone for seal of electronic components
Technique Data of HY-Q642# high translucent silicon
Model | Color | Mixing ratio (%) | Pot life (mins) | Demould time ( hrs) | Hardness ( A0 ) | Tensile-strength (kgf/cm2) | Tear-strength (kgf/cm) | Viscosity (cps) | Shrinkage rate (%) | Elongation (%) | type |
Q642# | high translucent | 1 : 1 | 30 | 4-6 | 41 | ≥ 70 | ≥ 14 | 11000 | ≤0.3% | 500% | addition |
OPERRATING INSTRUCTION of HY-Q642# High Translucent addition silicon rubber:
1. Stir part A and part B with right mixing ratio (1:1) evenly. And get the mixture for vacuum-pumping. (If there is no vacuumizer, you can just pour the mixture slowly from the corner so that less bubbles caused)
2. Enclose the product (the original model) with four plastic plates or wooden plates.
3. Clean your products and brush a layer of release agent(detergent or soap water) on your product.
4. Pour the mixture with correct mixing ratio into the model frame.
After about 2-4 hours, when the silicone cured, get out the original model, and there you get a finished addition cured silicone mold .
SHELF LIFE:
Twelve (12) months from date of shipment when stored at 24°C in original unopened packages.
More information about the high translucent silicone rubber , pls contact with Miss Caroline:
Tel: +86-755-89948019
Mobile: +86-18938867567
Skype: cathy19900719
Email: hysf(at)szrl(dot)net
Website : www(dot)szrl(dot)net
网络文化经营许可证:浙ICP备14006100号-11 2007-2024 Tradevv.com. All rights reserved.