FDA addition cure silicone rubber

FOB Price

US $16.60
200 - 40,000 kilogram
US $10.20
40,001 - 999,999 kilogram

group nameAddition cure silicone rubber
Min Order200 kilogram
brand nameHong Ye silicone rubber
modelHY-E-630 silicone
payment methodT/T, L/C, Westem Union
update timeFri, 08 Nov 2013 17:04:36 GMT

contact supplier

Paramtents

Application Make molds
Appearance Fluid
Color Translucent
Mix Ratio 1:1
Nil shrinkage <0.1%
Quality Food grade, safe to body
MOQ 200 KG
Package 20kg/drum, 200kg/drum
Delivery time 3-5 days after payment confirmed
Certification RoHS.MSDS.SGS

Packging & Delivery

Min Order200 kilogram

Briefing

Light viscosity and good flowability;
Low shrinkage;
Favorable tension;
No deformation;
High temperature resistance.

Detailed

Description of FDA addition cure silicone rubber

FDA addition cure silicone rubber is generally named two-components silicone rubber, Part A and part B. platinum cure silicone rubber features an exceptional fluidity and good operability. The mixing ratio is 1:1,mainly be suitable for food making molds application.

FDA addition cure silicone rubber application

FDA addition cure silicone rubber mainly used for making cake and chocolate , candy and any other FDA food product mold making etc.

Advantage of FDA addition cure silicone rubber

* low shrinkage (less than 0.1% )

*high tensile and tear strength with high copy times

*easy for operation (mixing ratio at 1:1 )

*good fluidity easy for pouring operation ( in round 10000 cps )

datasheet of hy-E-630 FDA addition cure silicone rubber

Product	E-630
Appearance	Translucent
Hardness(shore A)	30±2
Mix ratio(A:B)	1:1
Viscocity Part A(mPa.s)	25000±2000
Viscocity Part B(mPa.s)	2400±500
Tensile strength (kgf/cm²)	50±5
Tear-strength (kN/m)	16±2
Elongation(%)	450±50
Pot life/working time (mins)	30-40
Curing time/setting time (hrs)	3-4hrs(25°C) 110-20mins(60°C)
Shrinkage rate (%)	0.1

OPERRATING INSTRUCTION of FDA addition cure silicone rubber:

1. Stir part A and part B with right mixing ratio (1:1) evenly. And get the mixture for vacuum-pumping. (If there is no vacuumize , you can just pour the mixture slowly from the corner so that less bubbles caused)

2. Enclose the product (the original model) with four plastic plates or wooden plates.

3. Clean your products and brush a layer of release agent (detergent or soap water) on your product.

4. Pour the mixture with correct mixing ratio into the model frame.

After about 2-4 hours, when the silicone cured, get out the original model, and there you get a finished addition cured silicone mold .

FDA addition cure silicone rubber