silicone shoe insoles making

FOB Price

US $10.00
200 - 40,000 kilogram
US $9.00
40,001 - 999,999 kilogram

group nameAddition cure silicone rubber
Min Order200 kilogram
brand nameHong Ye silicone rubber
modelE625 silicone rubber
payment methodT/T, L/C, Westem Union
update timeFri, 08 Nov 2013 17:05:18 GMT

contact supplier

Paramtents

state liquid
color of silicone part A translucent
sample available
mixing 1:1
feature high tensile strength
feature 1 high tear strength
feature 2 high tear strength
feature 3 non shrinkage
feature 4 high copy times
feature 5 technical service provided

Packging & Delivery

Min Order200 kilogram

Briefing

silicone shoe insoles making
manufacturer of silicone for shoes
soft and comfortable silicone insoles
technical service

Detailed

FEATURE of silicone shoe insoles making :

1. silicone shoe insoles making is Two-part silicon rubber

2. silicone shoe insoles making can both cured at room temperature within 2-4 hours or cured under heated

3.soft and comfortable silicone insoles

4.Transparent and translucent silicone are available

silicone shoe insoles making paramter

Model	Color	Mixing ratio (%)	Pot life (mins)	Demould time ( hrs)	Hardness ( shore A )	Tensile-strength (kgf/cm2 )	Tear-strength (KN/m)	Viscosity after mixed (cps)	Shrinkage rate (%)	Elongation (%)
E625	Translucent	1 : 1	30-40	6-8	25±2	~60	~15	~10000	≤0.1%	~300%

Model

Color

Mixing ratio (%)

Pot life (mins)

Demould

time

( hrs)

Hardness ( shore A )

Tensile-strength

(kgf/cm2 )

Tear-strength (KN/m)

Viscosity after mixed

(cps)

Shrinkage

rate (%)

Elongation

(%)

E625

Translucent

1 : 1

30-40

6-8

25±2

~60

~15

~10000

≤0.1%

~300%

Operation of silicone shoe insoles making

1.Pls clear the model and tool totally before operation to prevent cure inhibition.

2.Weigh the two part correctly by electronic weight in two separate container .

2. Mixing the two part in 1:1 and stir part A and part B evenly in 2-3 minutes .

3.And get the mixture for vacuum-pumping for de-air the bubble in around 2-3 minutes . (If there is no vacuum machine, pls pour the mixture carefully and slowly down the side of the mold frame so that less bubbles caused)

2. Enclose the product (the original model) with four plastic plates or wooden plates.

3. Clean your products and brush a layer of release agent(detergent or soap water) on your product.

4. Pour the vacuumed mixture into the model frame from the side of the mold frame .