Addition Curing Silicon Rubber for mould making chocolate (HY-E620)
- US $12.86
200 - 40,000 kilogram
- US $7.86
40,001 - 999,999 kilogram
group nameAddition cure silicone rubber
-
Min Order200 kilogram
brand nameHong Ye silicone rubber
modelHY-E620# silicone for shoe soles
payment methodT/T, L/C, Westem Union
-
update timeFri, 08 Nov 2013 17:08:45 GMT
Paramtents
color translucence
Export Markets worldwide
Group Addition silicone rubber
Standard ISO9001, SGS,FDA
HS Code 39100000
application chocolate mould making
shelflife 12month
mix ratio 1:1
MOQ 200kg
package 250kg/drum or 20kg/drum
Packging & Delivery
Min Order200 kilogram
Briefing
Detailed
Addition Curing Silicon Rubber for mould making chocolate (HY-E620)
Addition Curing Silicon Rubber application:
E620 is a kind of Addition Curing Silicon Rubber for choclate mold. It's liquid with moderate viscosity and can be poured and brushed. The mold made out of the silicone and curing agent, which with high temperature up to 250-300° C, has dimension stability, low linear shrinkage. It's a two-component material with mixing ratio of 1: 1, and it's used for soft mold making, etc.
Operation instruction of Addition Curing Silicon Rubber for mould making chocolate (HY-E620) :
1. Stir part A and part B with right mixing ratio (1: 1) evenly. And get the mixture for vacuum-pumping. (If there is no vacuumize, you can just pour the mixture slowly from the corner so that less bubbles caused)
2. Enclose the product (the original model) with four plastic plates or wooden plates.
3. Clean your products and brush a layer of release agent (detergent or soap water) on your product.
4. Pour the mixture with correct mixing ratio into the model frame.
After about 2-4 hours, when the silicone cured, get out the original model, and there you get a finished addition cured silicone mold.
TDS of Addition Curing Silicon Rubber for mould making chocolate (HY-E620) with different hardness
| Model | E615 | E620 | E625 |
| Appearance | Translucent | Translucent | Translucent |
| Mixing Ratio | 1: 1 | 1: 1 | 1: 1 |
| OperateTime(Mins25° C) | 2~3 | 2~3 | 2~3 |
| CuringTime (Mins 25° C) | 30 | 30 | 30 |
| Hardness (A° ) | 15± 2 | 20± 2 | 25± 2 |
| Density ( g/cm 3 ) | 1.08 | 1.08 | 1.08 |
| Viscosity (CS) (Part A) | 10000 ± 2000 | 20000 ± 2000 | 22000 ± 2000 |
| Viscosity(CS)(Part B) | 5000 ± 500 | 5000 ± 500 | 4000 ± 500 |
| Viscosity (CS) (After mixed) | 12000 ± 2000 | 12000 ± 2000 | 10000 ± 2000 |
| Tensile-strength( kgf /cm 2 ) | 35± 5 | 46± 5 | 44± 5 |
| Tear-strength (kgf /cm ) | 10± 2 | 11± 2 | 12± 2 |
| Elongation-break(%) | 430 ± 50 | 460 ± 50 | 490 ± 50 |
| Retractility(%) | ≤ 0.1 | ≤ 0.1 | ≤ 0.1 |
Any question about Addition Curing Silicon Rubber, pls free to ask Ms Sarah.
Tel:86-18938867506
Skype:Sarah_szrl
You need a product
You May Like
- Nearest port for product export
- Shenzhen, Guangzhou, Xiamen, Shanghai
- Delivery clauses under the trade mode
- FOB, CFR, CIF
- Acceptable payment methods
- T/T, L/C, Westem Union
- Export mode
- Export through agents