200 - 40,000 kilogram
40,001 - 999,999 kilogram
group nameAddition cure silicone rubber
Min Order200 kilogram
brand nameHong Ye silicone rubber
modelMolding Silicone Rubber
payment methodT/T, L/C, Westem Union
update timeFri, 08 Nov 2013 17:09:11 GMT
Color Translucent
Sample Free
Usage for many produce mold making in pouring way
Classification Chemical Auxiliary Agent
EINECS No. 39100000
Other Names addttion molding silicone
Hardness 18-40A
Mixing Ratio !:1
Min Order200 kilogram
Addition Molding Silicone
Description of addition molding silicone:
HY-E625# addition molding silicone is generally named two-components silicone rubber, Part A is a flowable liquid, part B is the curing agent. It features an exceptional fluidity and good operability. The mixing ratio is 1:1, mainly be suitable for making molds application.
Applications of addtion moldign silicone
HY- E625# addition molding silicone could be mainly used for making concrete stones, precision molds, PU molds, for life casting, fabric finishing,shoe insoles making, seal for electronic components and solar circuit board, trademark decoration. etc.
Technique Data sheet of addtion molding silicone:
Model | HY-E625# |
Appearance | Translucent |
Mixing Ratio | 1:1 |
Operating time (Mins 25°C) | 30 - 50 |
Curing time (Mins 25°C) | 120 - 240 |
Curing time (Mins 60°C) | 20 - 30 |
Hardness (A°) | 25±2 |
Density ( g/cm 3 ) | 1.08 |
Viscosity (CS) (Part A) | 30000 ± 5000 |
Viscosity (CS) (Part B) | 5000 ± 500 |
Viscosity (CS) (After mixed) | 10000 ± 2000 |
Tensile-strength( kgf /cm2 ) | 50± 5 |
Tear-strength (kgf /cm2 ) | 15 ± 2 |
Elongation-break(%) | 500 ± 50 |
Retractility(%) | ≤0.1 |
OPERRATING INSTRUCTION of addtion molding silicone:
1. Clean your products and brush a layer of release agent (detergent or soap water) on the surface of your product.
Note: The model should not have been used to make molds for tin cured silicone rubber before. Otherwise, the addition silicone will not get cured. (Use a new model to test it)
2. Enclose the product (the original model) with four plastic plates or wooden plates.
3. Mixing part A and part B with 1:1 mixing ratio and stir evenly. And get the mixture for vacuum-pumping. (If there is no vacuumizer, you can just pour the mixture slowly from the corner so that less bubbles caused)
4. Pour the mixture into the model frame.
After about 2-4 hours, when the silicone cured, get out the original model, and there you get a finished addition cured silicone mold .
SHELF LIFE of addtion molding silicone:
Twelve (12) months from date of shipment when stored at 24°C in original unopened packages.
PACKAGE of addtion molding silicone:
Packed in clean 20kg/pail, 200kg/pail.
网络文化经营许可证:浙ICP备14006100号-11 2007-2024 Tradevv.com. All rights reserved.