mould making silicone, silicone rubber for molding
- US $8.00
200 - 40,000 kilogram
- US $6.00
40,001 - 999,999 kilogram
group nameAddition cure silicone rubber
-
Min Order200 kilogram
brand nameHong Ye silicone rubber
modelHY6 series
payment methodT/T, L/C, Westem Union
-
update timeFri, 08 Nov 2013 17:15:36 GMT
Paramtents
color white
HS code 39100000
sample available
normal packing 25kgs per drum
delivery within 3 days
Shelf life One year
Certificant RoHS, Reach, MSDS,SGS.ISO9001:2008
application Mold making silicone materials
MOQ 200kgs
Packging & Delivery
Min Order200 kilogram
Briefing
1.Low shrinkage
2.Favorable tension
3.No deformation
4.good operability
Detailed
mould making silicone has been used for more than 15 years to reproduce sculpture all over the world ranging in size from less than 1" (2.54 cm) to almost 400 feet high (120 m).
Today, mould making silicone are used by thousands of sculptors and foundries for casting wax, resins, plaster, concrete and other materials to make accurate reproductions of original sculpture.
Project Specific - mould making silicone wide range includes mold rubbers that can be poured on , brushed on , sprayed on or pressed on to any original sculpture and will reproduce detail perfectly.
mould making silicone 625 TDS
Model | 625# |
Appearance | white |
Mixing proportion of curing agent(%) | 2-3% |
Operating time ( mins ) | 30-60 |
Curing time( hours ) | 6-8 |
Hardness (A°) | 25 |
Density ( g/cm 3) | 1.08 |
Viscosity (CS) | 19000 |
Tensile-strength ( kgf /cm2 ) | ≥40 |
Tear-strength (kgf /cm2 ) | ≥26 |
Elongation-break(%) | ≥400 |
Retractility(%) | ≤0.3 |
mould making silicone features
mould making silicone is white or red flowing liquid with general hardness of 22-50A°after curing.
mould making silicone is a kind elastic silicon rubber mold which features as below:
- resistance to deformation,
- high-temperature resistance
- acid-alkali resistance
- expansion as well as high reproduction times,
- good tensile strength ,
- Strong Tear strength
- Good elongation
- Low shrinkage
- Long shelf time which can reach at least 1 year
Storage and Precautions of mould making silicone
High reproduction mould making silicone, which is an environmentally-friendly liquid silicone product, is not easy to burn and can be stored and transported as non-hazardous goods. The shelf life of the product is about one year from the date of production. Inspection is required when exceeding the time limited. It can continue to be used in case of neither thickening nor deterioration.
How to Use mould making silicone:
1.Weigh a certain amount of silicone rubber, and then add curing agent by 2%-3% of silicone rubber. Ensure that all the silicone rubber is used in short time.
2. Fully stirring the silicone rubber, then put them in vacuum and pump 3-5 minutes, make moulds after bubbled.
3. Curing speed is closely related to the temperature and humidity, the higher the temperature and humidity, the faster the curing. Customers can choose curing agent or adjust the amount of curing agent in order to reach appropriate curing speed according to the weather.
Please dont hesitate to ask if you have any questions about mould making silicone, here Cassi is at your service:
Tel: 86-755-89948006
Cell:86-18938867521
Email: hyjg(at)szrl(dot)net
You need a product
Related Searches
You May Like
- Nearest port for product export
- Shenzhen, Guangzhou, Xiamen, Shanghai
- Delivery clauses under the trade mode
- FOB, CFR, CIF
- Acceptable payment methods
- T/T, L/C, Westem Union
- Export mode
- Export through agents