Silicone For Concrete Mold Making

 Description of Silicone For Concrete Mold Making :

Addition Platinum Silicone For Concrete Molds are generally named as two-part addition silicone rubber that vulcanises at room temperature.Part A is a flowable liquid, part B is the curing agent(platinum catalyst). It features an exceptional fluidity ,good operability,excellent physical properties and very low shrinkage. The mixing ratio between Part A and Part B can be 10:1 or 1:1.

Main application of Silicone For Concrete Mold Making :

• Rapid prototyping (urethane casting/silicone tooling/vacuum casting)
• Concrete moulding
• PU resin casting
• General Mouldmaking
• Superior manual mold designs
• Cake/Chocolate molds

Main properties of Silicone For Concrete Mold Making :

• almost nil shrinkage
• high chemical resistance to aggressive components of some types of resins
• good tear strength (this feature ensures higher resistance to wearing and shearing)
• high degree of precision in reproduction
• high dimensional stability over time and  non-deformability
• high resistance to high temperatures and ageing (resit to -60-200°C)
• excellent non-stick effect
• environmental, odorless and nontoxic

Silicone For Concrete Molds(The mixing ratio of part A and part B can be adjusted to 1:1or 10:1)

Notice:

All above addition silicone is forbidden to mix with organic compounds of condensation cure silicone rubber,otherwise, the silicone rubber will not cure, and also should not mix with organic compounds containing S, P, N as well as metallic salt of organic acids. It also will cause this product cure uncompletely or not cure.

Any questions about Silicone Rubber, Leah is at your service.

TEL: 086-755-89212382

FAX: 086-755-89948030

MOBILE: 086-189 3886 7561

Website: www(dot)szrl(dot)net

E-MAIL: hyji(at)szrl(dot)net

Skype: leahchou1214

QQ: 189 3886 7561