HY Silicon rubber Mould Making and Casting company
- US $9.82
200 - 40,000 kilogram
- US $6.98
40,001 - 999,999 kilogram
group nameAddition cure silicone rubber
-
Min Order200 kilogram
brand nameHong Ye silicone rubber
modelHY-7 series silicon
payment methodT/T, L/C, Westem Union
-
update timeFri, 08 Nov 2013 17:17:05 GMT
Paramtents
Certifications RoHS.SGS ISO9001:2000
transport by sea
cololr any
Packging & Delivery
Min Order200 kilogram
Briefing
2,Light viscosity
3,Low shrinkage,age resistance
4,No deformation and Favorable tension
Detailed
The advantages:
1,easy-operation
2,Light viscosity
3,Low shrinkage,age resistance
4,No deformation and Favorable tension
Introduction of high temp silicone rubber for making soap molds:
- structural silicone compound: flowable liquid silicon and catalyst.
- RTV 2 molding silicone rubber cures at room temperature within 4-6 hours.
Application of high temp silicone rubber for making soap molds
structural silicone compound is mainly applied for making various molds:
structural silicone compound can used to reproduce concrete or cement, gypsum, gypsum, architecture, decorative arts and crafts, big statue, cultural relic product, etc.
structural silicone compound can used to reproduce poly resin, epoxy, polyurethane-polymer, plastic toy, gift and stationery.
structural silicone compound can also used to reproduce soaps, candle & lighting.
FEATURES of high temp silicone rubber for making soap molds:
- RTV 2 molding silicone rubber has an exceptional fluidity and good operability.
- RTV 2 molding silicone rubber has good Temperature and deformation resistance as well as low shrinkage.
- RTV 2 molding silicone rubber has High duplication times.
Operation step for high temp silicone rubber for making soap molds:
- Step One to use RTV 2 molding silicone rubber: Take 100g of part A and add 2g of part B and mix the silicon rubber and the curing agent evenly.
- Step Two to use RTV 2 molding silicone rubber: vacuum pumping
- Without exception, this takes less than 10 minutes. Otherwise, it will cause cross linking reaction, and no more further steps will be available.
- Step Three to use RTV 2 molding silicone rubber: Brushing cast & Perfusion Molding operation.
silicone rubber RTV-630#:
Usage: Silicon rubber for PU/poly resin products, plaster, candles, gypsums crafts, cement products, concrete/architectural products, statuary, casting molds making, etc.
Model | 630# |
Appearance | white |
Mixing proportion of curing agent (%) | 5% |
Operating time (mins 25 0C ) | 20-40 |
Curing time(hours 25 0C) | 3-5 |
Hardness (A°) | 30±2 |
Density ( g/cm 3 ) | 1.08 |
Viscosity (Mpas -25 0C) | 27000-32000 |
Tensile-strength(kgf /cm2 ) | ≥40 |
Tear-strength (kgf /cm ) | ≥30 |
Elongation-break(%) | ≥ 450 |
Retractility(%) | ≤0.3 |
'
room temperature vulcanizing silicon
Need any help on silicone rubber, please feel free to contact Ms Annie :
Tel: 0086-0755-89948294
Mob:0086-0755-18938861891
E-mail: hyjx(at)szrl(dot)net
skype: annie2012a
You need a product
Related Searches
You May Like
- Nearest port for product export
- Shenzhen, Guangzhou, Xiamen, Shanghai
- Delivery clauses under the trade mode
- FOB, CFR, CIF
- Acceptable payment methods
- T/T, L/C, Westem Union
- Export mode
- Export through agents