Liquid RTV Silicone Rubber For Mold Making

Liquid RTV Silicone Rubber For Mold Making

Liquid RTV Silicone Rubber For Mold Making application: 

Liquid RTV Silicone Rubber For Mold Making  compounds for moldmaking are suitable for mold masters for molding with polyester resin, epoxy resin, urethane foam, wax, plaster, and low-melt-point metal alloys. These RTV silicone rubber compounds allow accurate reproduction of the shape of the original. They are easy to use and are thus used widely in industrial applications, as well as by hobbyists looking to create the perfect replica.

Liquid RTV Silicone Rubber For Mold Making  description:

A. Workability

Liquid RTV Silicone Rubber For Mold Making and curing agent are mixed and then poured into the mold to create a silicone rubber mold quickly. Workable time and cure time can be adjusted. 

B. Mold-releasability

The cured  Liquid RTV Silicone Rubber For Mold Making  releases easily from the mold, so mold-release agents (soapy water, wax, etc.) are unnecessary.

C.Dimensional stability

These liquid RTV silicone rubber offer good dimensional stability, with little shrinkage.

D. Flowability

  RTV silicone rubber have excellent flowability, so the original form is reproduced accurately. This includes even intricate shapes and details such as fingerprints and wood grain.

E.Heat and chemical resistance

Liquid RTV Silicone Rubber For Mold Making  have outstanding resistance to heat and chemicals.

F.Deep-section curability

Liquid RTV Silicone Rubber For Mold Making compound cures uniformly throughout the mold, regardless of thickness

G.Non-exothermic

No heat is generated during curing, meaning no adverse effects to the original.

Liquid RTV Silicone Rubber For Mold Making operations 

If the customer wants to make large products and large size molds, the mold should be made of silicon rubber with high hardness. On the contrary, if the mold with fine and precision patterns, it should be made of silicon with low hardness. The amount of the curing agent depends on the actual requirements of the customer. If molds requiring fast drying and demold, more curing agent is needed; contrarily, if molds requiring slower drying and demold, less curing agent is needed.

CERTIFICATION:

ISO9001: HK05/01358 

SGS:GZ0606100461/CHEM

RoHS:BTRS091718751

Patent:ZL200520001597.8

Any further information of Liquid RTV Silicone Rubber For Mold Making required or suggestion, pls feel free to call 

Ms. Moe

TEL: 0086-755-8994 8019 and 0086-13243825997

FAX: 0086-7-5589948030

Welcome to our website for further information www dot szrl dot net