200 - 40,000 kilogram
40,001 - 999,999 kilogram
group nameAddition cure silicone rubber
Min Order200 kilogram
brand nameHong Ye silicone rubber
modelHY-215#/210# silicone rubber
payment methodT/T, L/C, Westem Union
update timeFri, 08 Nov 2013 17:36:46 GMT
Classification Other Adhesives
Main Raw Material Silicone
Usage Construction,Transportation,LED/LCD
color transparent
sample available with free of charge
performance two parts
features fluid
Min Order200 kilogram
Encapsulant and Potting silicone
HY ncapsulant provide solar modules excellent durability and protection against corrosion and delamination.
Applications of Encapsulant and Potting silicone:
Encapsulant and Potting silicone is applicable to sealing, bonding and coating for electronic parts. Filling for LED, LCD electronic display, circuit board.
Description of Encapsulant and Potting silicone:
HY-210#Encapsulant and Potting silicone is two-component room temperature vulcanization silicone rubber, which has low viscosity, easy mixing and pouring, is applicable to bulk pouring with excellent electrical performance.
Standard Datasheet of Encapsulant and Potting silicone:
Model HY-210# Encapsulant and Potting silicone Type
Gel-type Components A B
Appearance (liquid) black / transparent / white yellowy
Mixing ratio 100 5
Viscosity (Pa.s) 5000
Pot life(25C) (mins) 20 - 30
Curing time (mins) 2 - 4
Hardness shore A 25 ± 2
Tensile strength (Mpa) 0.5 - 1.5
Elongation at break (%) 30 - 50
Dielectric strength (kv/m-1) 20
Specific inductive capacity(1MHz) 2.8 - 3.2
Breakdown voltage (KV.mm-1) 16
Volume resistivity () 1×1014
Dielectric loss factor (1MHz) 1×10-3
Features of Encapsulant and Potting silicone:
HY-210# Encapsulant and Potting silicone has sticky viscosity, low shrinkage and non-corrosive;
the HY-210# Encapsulant and Potting silicone can be used for a long period at the temperature of -60C-200C with the characteristics of moisture-proof and waterproof, radiation-proof as well as weatherable and anti-ageing.
Using Instructions of Encapsulant and Potting silicone:
1. Clean and dry the electronic element to be poured;
2. Mix the component A (silicone) and component B(hardener) evenly according to the proportion, and can be poured after deaired the bubbles. The surface will cure in about 2-4 hours after pouring.
More information need about our HY-210# Encapsulant and Potting silicone, please feel free to contact with Miss Apple.
Tel: 0086-755-89948013
Moible: 0086-15889446131
网络文化经营许可证:浙ICP备14006100号-11 2007-2024 Tradevv.com. All rights reserved.