| Addition Silicone Rubber For Sugar Moulds Making |
Addition Silicone Rubber For Sugar Moulds Making are generally named as two-part addition silicone rubber that vulcanises at room temperature.Part A is a flowable liquid, part B is the curing agent(platinum catalyst). It features an exceptional fluidity ,good operability,excellent physical properties and very low shrinkage. The mixing ratio between Part A and Part B can be 10:1 or 1:1. Product | EME615 | EME620 | EME625 | EME630 | EME642 | Appearance | Translucent | Translucent | Translucent | Translucent | Translucent | Hardness(shore A) | 15±2 | 20±2 | 25±2 | 30±2 | 40±2 | Mix ratio(A:B) | 1:1/10:1 | 1:1/10:1 | 1:1/10:1 | 1:1/10:1 | 1:1/10:1 | Viscocity Part A(mPa.s) | 9000±2000 | 11000±2000 | 12000±2000 | 12500±2000 | 15000±2000 | Viscocity Part B(mPa.s) | 1900±500 | 1900±500 | 1800±500 | 2400±500 | 100±50 | Tensile strength (MPa) | 6.2 | 6.5 | 6.7 | 7.2 | 7.6 | Tear-strength (kN/m) | 25 | 26 | 23 | 24 | 22 | Elongation(%) | 569 | 581 | 480 | 440 | 450 | Density | 1.05 | 1.05 | 1.07 | 1.13 | 1.14 | Pot life/working time (mins) (adjustable) | 30-40 | 30-40 | 30-40 | 30-40 | 30-40 | Curing time/setting time (hrs) (adjustable) | 3-4hrs(25°C) 120-30mins(60°C) | 3-4hrs(25°C) 120-30mins(60°C) | 3-4hrs(25°C) 120-30mins(60°C) | 3-4hrs(25°C) 20-30mins(60°C) | 6-8hrs(25°C) 30-50mins(60°C) | Shrinkage rate (%) | 0.1 | 0.1 | 0.1 | 0.1 | 0.1 |
|
 
| Addition Silicone Rubber For Sugar Moulds Making Appilications |
Especially suitable for the molding for plaster decoration duplication,
for gypsum sculpture reproduction,
for duplicating resin product with fine details,
for PU resin reproduction,
for wax molding,
for stone duplication ,
for epoxy moulds,
for pacrylic moulding,
for reproducing polyester craft
A. Decorative items: cornices Silicone molds ,columns Silicone molds,ornaments Silicone molds,statues Silicone molds .....
B. Casting of funiture and decoration crafts molding
C. Construction:prefabrication of decrative features Silicone molds ,pavement Silicone molds ,paving stone Silicone molds ,urban furniture molding,concrete products molding,concrete casting,cement products casting
making silicone molds for artificial stone
concrete statue molds,garden statue molds
stone molds
cement crafts
GRC/GPR decorations,ect.
D. Soap moulding,candles crafts moulding,toys moulding,sculpture moulding
Some of the materials you can cast into a silicone mold are:
• Urethane Plastic
• Urethane Rubber
• Epoxy
• Polyester
• Fiberglass Resign
• Plaster
• Soap
• Wax
• Low melt metals (up to 400 degrees Max)
• HydroCal White
• UltraCal 30
• Rigid Foam • concrete statue mold | Addition Silicone Rubber For Sugar Moulds Making Feactures |
/Good fluidity and good operability and good for pouring method.
/Excellent mechanical properties, in particular tear strength and tensile strength.
/Excellent flexibility and it is easy to demould.
/High temperature resistance, high duplication times and repeated use.
/There are a range of catalysts/curing agent/hardener allows the Liquid rtv silicone rubber to fulfill requirements for various applications and various requirements on the operation time and curing time. | How to use Addition Silicone Rubber For Sugar Moulds Making |
1.The cast pouring, for example:
Prepare a frame, fix the prototype for copy into the frame, (if the prototype’s material is glass or ceramic, the release agent is necessary to prevent sticking.
2. Take 1 part A and 1 part B,mix themevenly.
3.Vacuum defoaming in 1~3 min,inject the rubber into the type box, then vacuum defoaming again, curing 24 hours in nature room temperature, use it after demold.
4. Demold after 3 hours’ room temperature curing, and then use it after 24 hours’ keep mold under the same condition.
| How to make a perfect silicone molds with Addition Silicone Rubber For Sugar Moulds Making |
Firstly,the silicone rubber and catalyst must be mix evenly,mixing for 5-6 minutes,if you do not mix evenly,it will cause one part is dry but other part is wet. Secondly,if you have a vacuumed machine,that's will be perfect, vacuuming mixed silicone for 5-6 minutes,there will not have bubble.
Thirdly,the silicone mould need 24 hours to complete dry,so when you finished the silicone mould,please after 24 hours later bring into production.
I believe that the silicone mould will be perfect if you pay attention to these points.
CERTIFICATION: ISO9001: HK05/01358 SGS:GZ0606100461/CHEM RoHS:BTRS091718751 Patent:ZL200520001597.8 Delivery terms:FOB,CFR,CIF Exchange rate:1USD=6.30RMB
Packing:5kg/pail,25kg/pail,200kg/pail
Delivery time is within 3 days after getting your bank receipt.
Payment Terms: T/T 100% in advance,L/C,Western Union
Mind order quantity(MOQ):200KG Transport: by sea or by air Shelf life:12 months under room temperature not open We hope you are happy with any purchases you have made from us. However, if you have any enquiries or concerns, please contact Ms.Moe to resolve any issues. Mail:hyt((at))szrl(dot)net
Mobile: +86-18938867514
Tel: +86-755-89212382
Fax: +86-755-89948030 . skype: moe.chai | 
