Addition silicone rubber for gypsum casting

FOB Price

US $11.56
100 - 40,000 kilogram
US $10.60
40,001 - 999,999 kilogram

group nameAddition cure silicone rubber
Min Order100 kilogram
brand nameHong Ye silicone rubber
modelHY-E642 silicon
payment methodT/T, L/C, Westem Union
update timeFri, 08 Nov 2013 17:45:35 GMT

contact supplier

Paramtents

color:any transport:by sea
Certifications:RoHS.SGS ISO9001:2000 provide curing agent for free
grade food grade
application mold making
HS 39100000
shelf life 1 year
brand hong ye silicone rubber
sample available

Packging & Delivery

Min Order100 kilogram

Briefing

advantages:
1,exceptional fluidity
2,good operability
3, Low shrankge
4,MSDS is free for providing

Detailed

Addition silicone rubber for gypsum casting

HY-E642 Addition Molding Silicone for gypsum casting copied Applications,

HY- E642# addition molding silicone could be mainly used for making concrete stones, precision molds, PU molds, resin molds, gypsum casting,candle molding,for life casting, fabric finishing, seal for electronic components and solar circuit board, trademark decoration. etc.

HY-E642 Addition Molding Silicone for gypsum casting copied Description

HY- E642# addition molding silicone is generally named two-components silicone rubber, Part A and part B. It features an exceptional fluidity and good operability. The mixing ratio is 1:1,mainly be suitable for making molds application.

Technique Data of HY-E642 Addition Molding Silicone for gypsum casting copied:

Model	HY-E642#
Appearance	Translucent
Mixing Ratio	1:1
Operating time (Mins 25°C)	30 - 40
Curing time (Mins 25°C)	120 - 240
Curing time (Mins 60°C)	20 - 30
Hardness (A°)	42±2
Density ( g/cm 3 )	1.08
Viscosity (CS) (Part A)	30000 ± 5000
Viscosity (CS) (Part B)	5000 ± 500
Viscosity (CS) (After mixed)	10000 ± 2000
Tensile-strength( kgf /cm2 )	100 ± 20
Tear-strength (kgf /cm2 )	15 ± 2
Elongation-break(%)	350 ± 20
Retractility(%)	≤0.1

Addition silicone rubber for gypsum casting

OPERRATING INSTRUCTION of HY-E642# molding silicone:

1. Stir part A and part B with right mixing ratio (1:1) evenly. And get the mixture for vacuum-pumping. (If there is no vacuumizer, you can just pour the mixture slowly from the corner so that less bubbles caused)

2. Enclose the product (the original model) with four plastic plates or wooden plates.

3. Clean your products and brush a layer of release agent(detergent or soap water) on your product.

4. Pour the mixture with correct mixing ratio into the model frame.

After about 2-4 hours, when the silicone cured, get out the original model, and there you get a finished addition cured silicone mold .

HY-E642 Addition Molding Silicone for gypsum casting copied SHELF LIFE:

Twelve (12) months from date of shipment when stored at 24°C in original unopened packages.

Contations on HY-E642 Addition Molding Silicone for gypsum casting copied:

Any more information , please fell free to contact with Mr Allen

Tel: 0086-755-89212365

Fax: 0086-755-89948030

Mobile:0086-18938861889

Addition silicone rubber for gypsum casting