Casting artificial stone addition silicone rubber
- US $14.50
200 - 40,000 kilogram
- US $7.50
40,001 - 999,999 kilogram
group nameAddition cure silicone rubber
-
Min Order200 kilogram
brand nameHong Ye silicone rubber
modelE642# silicon rubber
payment methodT/T, L/C, Westem Union
-
update timeFri, 08 Nov 2013 17:47:56 GMT
Paramtents
condition liquid
color white (as request)
Brand Hong Ye silicon rubber
application molding for stone products
mixing ratio 1:1
sample availabe
Packging & Delivery
Min Order200 kilogram
Briefing
high and low temperature resistance
resistance to ultraviolet radiation
environmental protection
water repellent
Detailed
Casting artificial stone addition silicone rubber
Applications:
It is mainly applied for making various molds:
it can be used to reproduce concrete or cement, gypsum, gypsum, architecture, decorative arts and crafts, big statue, cultural relic product, etc.
it can be used to reproduce poly resin, epoxy, polyurethane-polymer, plastic toy, gift and stationery.
it can also be used to reproduce soaps, candle & lighting.
Typical Datasheet :
| Model | Component | Colour | Mix Ratio (%) | Viscosity before Mix(cps) | Viscosity after Mix(cps) | Hardness (A0) | Pot Life | Curing Time | Tensile Strength (kgf/cm2) | Tear Strength (kN/m) | Elongation (%) |
| E642# | A | Translucent | 1 | 20000 | 8200 | 42+/-2 | 30Min/25°C | 2-3Hrs/25°C | 80+/-20 | 10.4 | 350+/-50 |
| B | Translucent | 1 | 3500 | 20Min/60°C |
FEATURES:
- Addition Cure Silicone Rubber for Concrete Crafts has an exceptional fluidity and good operability.
- Addition Cure Silicone Rubber for Concrete Crafts has good Temperature and deformation resistance as well as low shrinkage.
- Addition Cure Silicone Rubber for Concrete Crafts has High duplication times
- Auperior physical & performance properties
- Castings a surface finish you're going to love.
- Long-term dimensional stability.
- The ability to render color-accurate castings every time.
Operation:
- Step One to use E642#: Take 100g of part A and add 100g of part B and mix the silicon rubber and the curing agent evenly.
- Step Two to use E642#: vacuum pumping
- Without exception, this takes less than 10 minutes. Otherwise, it will cause cross linking reaction, and no more further steps will be available.
- Step Three to use E642#: Brushing cast & Perfusion Molding operation.
How to make artificial stone with silicone mold.
1, Prepare a silicone mold.
2, Pigment Mold Cavity.
3, Cast Concrete Into The Mold.
4, Let Concrete Set.
5, After the concrete has cured, the mold is stripped off the casting, cleaned & ready for casting again.
Do you meet the following problems when making silicone rubber molds?
1. Why the silicone mold just can be reproduced for a few times?
2. Why does the silicone mold appear to be dry outside but wet inside?
3. Why does the silicone mold get burnt out?
4. Why the silicone mold appear with weak tear strength?
5. Why is the silicone mold oily?
Place of Origin Guangdong China
Brand Name: Hong Ye silicone rubber
Minimum Order Quantity: 200 Kilogram
Packaging Details: 20kg/drum and 200kg/drum
Delivery Time: within 3 days after payment confirmed in our bank.
Payment Terms: L/C,T/T
Supply Ability: 8000 kg/day
Further information, please feel free to contact Firleanna:
SKYPE:HY-Firleanna
T: 86-755-89212365
M:86-18938867520
F: 86-755-89948030
3w(dot)szrl(dot)net
3w(dot)sellsilicon(dot)com
You need a product
You May Like
- Nearest port for product export
- Shenzhen, Guangzhou, Xiamen, Shanghai
- Delivery clauses under the trade mode
- FOB, CFR, CIF
- Acceptable payment methods
- T/T, L/C, Westem Union
- Export mode
- Export through agents