Flexible Addition cured silicone rubber for prototyping

Flexible Addition cured silicone rubber for prototyping

Applications:

   It mainly use for making molds for resin, gypsum and cement product with medium size.

Typical Datasheet :

Characteristics: 

*low shrinkage (less than 0.1% )

*high tensile and tear strength with high copy times

*easy for operation (mixing ratio at 1:1 /10:1)

*very good flow and easy for pouring operation

*Fast and non-shrink cure at room temperature which can be accelerated considerably by the application of heat

 Points of attention:

1,Prone to poisoning, can not mix with condensation, ionic compounds containing N, S-, P, organic matter and of Sn, As, Hg, Ph., easy molding plastic poisoning, resulting in the phenomenon of not curing.

2,Comparing with Condensation cure silicone, Addition cure silicone's adhesive properties to be worse.

3,Addition cure silicone affect by temperature greatly when cured under room temperature.

4,Addition cure silicone is easy to poisoning, please clean the tools which are used for condensation silicone rubber, so that it can avoid poisoning.

It’s fobidden to add the pigment or powder to addition cure silicone rubber arbitrarily,it’s easy to make the catalyst to be poisoning.

5,Addition cure silicone rubebr has two-component, the component A and component B, please pay attention to clean the component A containers before using for the component B, and vice versa

6,In order to avoid the hardness change, we should mix the component A and component B according to its mixing ratio strictly, no atter it’s 1 : 1 or 10 : 1.

Package and storage :

1. 20kg or 200kg /drum.

2. It is a kind of non-dangerous goods, and it should be stored at a cool and dry place, please keep it from sun and rain.

Further information, please feel free to contact Firleanna:

SKYPE:HY-Firleanna

T: 86-755-89212365

M:86-18938867520

F: 86-755-89948030

3w(dot)szrl(dot)net

3w(dot)sellsilicon(dot)com