200 - 40,000 kilogram
40,001 - 999,999 kilogram
group nameAddition cure silicone rubber
Min Order200 kilogram
brand nameHong Ye silicone rubber
modelHigh Translucent Silicone
payment methodT/T, L/C, Westem Union
update timeFri, 08 Nov 2013 17:48:41 GMT
Color high translucent
Silicone Rubber:Curing Agent 1:1
Certification SGS,MSDS,RoHS
Material 100% silicone
Certificate SGS
Classification Chemical Auxiliary Agent
Appearance Fluid
Min Order200 kilogram
Food Grade Liquid Silicone
Contact Ms Mandy for more information :
hyjd(at)szrl.(dot)net , skype hyjmandy.tom.com or call 0086-18938861892
Application of food grade liquid silicone
Food grade silicone rubber mainly used for making precision molds, food grade molds(such as chocolate, cake moulds), fiberglass molding, shoes insoles, for life casting, fabric finishing, seal for electronic components and solar circuit board, trademark decoration, baby nipples, cable accessories, etc.
Datasheet of Food Grade Liquid Silicone
Model | HY-E620 |
Appearance | translucent |
Mixing proportion of curing agent(%) | 1:1 |
Operating time ( mins ) (25- 30 °C) | 30±10 |
Curing time( hrs) | 4±1 |
Hardness (A°) | 20±2 |
Density ( g/cm 3 ) | 1.08 |
Viscosity (CS) | 7000±2000 |
Tensile-strength ( kgf /cm2 ) | ≥40 |
Tear-strength (kgf /cm2 ) | ≥15 |
Elongation-break(%) | ≥300 |
Retractility(%) | ≤0.1 |
Features of food grade mould making silicone rubber
Description of food grade mould making silicone rubber
RTV-2 addition molding silicone rubber is generally named two-components silicone rubber, Part A is a flowable liquid, part B is the curing agent. It features an exceptional fluidity and good operability. The mixing ratio can be 100:10 or 1:1,mainly be suitable for making FDA molds application.
Operating instruction of food grade mould making silicone rubber
1.Stir part A and part B with right mixing ratio evenly. (HY-E620 is 1:1) and get the mixture for vacuum-pumping.(If there is no vacuumizer,you can just pour the mixture slowly from the corner so that less bubbles caused).
2.Enclose the product (the original model) with four plastic plates or wooden plates.
3. Clean your products and brush a layer of release agent(detergent or soap water) on your product.
4.Pour the mixture with correct mixing ratio into the model frame.
After about 2-4 hours, when the silicone cured, get out the original model, and there you get a finished addition cured silicone mold .
Shelf life of food grade mould making silicone rubber
Twelve (12) months from date of shipment when stored at 24°C in original unopened packages.
Contact Ms Mandy for more information :
hyjd(at)szrl.(dot)net , skype hyjmandy.tom.com or call 0086-18938861892
网络文化经营许可证:浙ICP备14006100号-11 2007-2024 Tradevv.com. All rights reserved.